Dolaimy House 3374D5 5 Light Gold Linear Chandelier Lighting Fixture Instruction Manual
- June 2, 2024
- Dolaimy House
Table of Contents
Dolaimy House 3374D5 5 Light Gold Linear Chandelier Lighting Fixture
Product Information
Specifications:
- SKU: #3374D5
- Components included: Metal Tube, Lip, Metal Cap, Finial, Hexnut, Spring Washer, Fixture, Allen Wrench, Wiring Terminal, Elbow Pipe, Metal Sleeve, Shade
- Bulb not included
Product Usage Instructions
Assembly Instructions:
- Place Elbow Pipe(S) onto Fixture(P).
- Secure Hexnuts(N) and Spring Washer(O) into the lip of Elbow Pipe(S) using Allen Wrench(Q).
- Open the Janitors from Wiring Terminal(R).
- Insert the white/black wire into the hole of Wiring Terminal(R) and close the Janitors.
- Place Metal Cap(L) on Lip(K) and secure with Finial(M).
- Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).
- Secure Metal Tube(I), Short Tube(H), Long Tube(G) into Lip(J) in order.
- Secure Canopy(E) into Long Tube(G).
- Install bulbs (not included) into Socket and secure Shade(U) into Metal Sleeve(T).
Frequently Asked Questions (FAQ)
-
Q: What should I do if I exceed the recommended wattage for the product?
A: It is important not to exceed the recommended wattage to avoid damage to the product or potential hazards. If you accidentally exceed the wattage, immediately
disconnect the product and replace the bulbs with ones that adhere to the recommended wattage. -
Q: Can I use LED bulbs with this product?
A: Yes, you can use LED bulbs with this product as long as they are compatible with the socket provided. Ensure that the LED bulbs meet the wattage recommendations for safe usage. -
Q: How do I clean and maintain this light fixture?
A: To clean the light fixture, first ensure it is turned off and cool. Use a soft, dry cloth to gently wipe away dust and debris. Avoid using harsh chemicals or abrasive materials that may damage the finish.
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W, LED 4W bulb types and wattages.
- Do not exceed recommended wattages
SKU:# 3374D5
(Not included the bulb)
Parts included
Hardware enclosed:
Step 1:
- Remove all parts and hard ware from box along with all plastic protective packaging.
- Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).
Step 2:
Place Elbow Pipe(S) onto Fixture(P), then secure Hexnuts(N), Spring Washer(O)
into the lip of Elbow Pipe(S), and secure Hexnuts(N) with Allen Wrench(Q).
Step 3:
- Open the Janitors from Wiring Terminal(R).
- Insert the white/black wire into the hole of Wiring Terminal(R), then close the Janitors.
- Place Metal Cap(L) on Lip(K) and secure with Finial(M).
Step 4:
Secure Metal Tube(I), Short Tube(H), Long Tube(G) into Lip(J) in order, and
secure Canopy(E) into Long Tube(G).
Step 5:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.
Step 6:
Connect the white wire of the fixture to the white wire of the supply circuit.
Connect the black wire of the fixture to the black wire of the supply circuit.
Connect the Ground fixture wire with the Ground J-Box wire, with the Wire
Connector(A) .
Step 7:
Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy
Nuts(F).
Step 8:
Install bulbs(not included) into Socket and secure Shade(U) into Metal
Sleeve(T).