LINDY 38337 2 Port HDMI 8K60 Switch User Manual

June 9, 2024
LINDY

LINDY 38337 2 Port HDMI 8K60 Switch

LINDY-38337 2-Port-HDMI 8K60-Switch -PRODUCT-IMAGE

Introduction

Thank you for purchasing the LINDY 2 Port HDMI Switch. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty  and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

This HDMI switch allows the user to connect two 8K Ultra High Speed source devices into a single 8K Ultra High Speed display or projector, then easily switch between them at the push of a button or remote control.

Package Contents

  • 2 Port HDMI 8K60 Switch
  • Remote control
  • USB Type-A to Micro-B cable,
  • Lindy Manual
Features
  • Supports HDMI 2.1, HDCP 2.3
  • Supports Resolutions up to 7680×4320, 60Hz, 4:4:4, 10-bit including HDR 10 and Dolby Vision
  • Supports full 48G bandwidth with DSC
  • Supported audio: Supports 7.1 Channel of LPCM, Dolby TrueHD and DTS-HD Master Audio Digital Signals.
Installation

Make sure all devices are switched off before making any connections! Once all the connections have been made, switch on the devices in the following order: Display  HDMI Switch, source device.

Connect the source devices such as DVD player, Games consoles, Set-top boxes, and Computers to the HDMI switch’s input ports. Then connect the 8K Display to the HDMI output port. When all the connections are made, connect the USB Cable for power.

Operation

Switch

LINDY-38337 2-Port-HDMI 8K60-Switch -01

  • DC/5V: DC 5V Input via Micro-B USB
  • OUTPUT: HDMI Output Port
  • INPUT 1-2: HDMI Input 1-2 Port
  • Power LED:
    • Red LED indicates: “Standby Mode”
    • Blue LED indicates: “Powered on”
  • No LED indicates: “No Power supply connected”.
  • Input LED “1/2”:
    • Blue LED indicates: “Active Signal Path”
    • No LED indicates: “No Input Signal”
  • Auto LED indicates:
    • Blue LED: Automatic Switching Mode on
    • No LED: Automatic Switching Mode off

IR LED indicates:
Blue LED: IR is on

Select Button: Short press to change the input channel; and long press the selector button for 3 seconds to change between the manual switching or automatic switching mode.
Auto mode LED indicator on for automatic switching mode and off for manual switching mode.

Remote

  • Power Button: Power On/Off
  • Input 1/2: Switch between Inputs 1 or 2
  • IR: Turn On/Off IR
  • Auto: Press to switch Automatic Switching On/Off.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of

Electronic Products

Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com ,
T: +49 (0)621 470050

Manufacturer (UK):
LINDY Electronics Ltd Sadler Forster Way Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk ,
T: +44 (0)1642 754000

Tested to comply with FCC standards.
For home and office use.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals