anslut 013665 Cord Lamp LED Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 013665 Cord Lamp LED
Care for the environment!
Recycle discarded product in accordance with local regulations.
Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
SAFETY INSTRUCTION
The product must be connected to an earthed power point.
Keep power cords and extension cords away from cutting tools, sharp objects
and other potential risks, such as wet floors and solvents.
Do not touch the product, plug or power cord with wet hands or other wet parts
of your body.
Do not use the product in wet rooms.
Check at regular intervals all electrical connections and power cords for
damage. Rectify any faults before using the light. Always have the wiring and
connections checked by an authorized electrician.
Check that the mains voltage corresponds to threated voltage on the type
plate.
Do not use the product in an explosive environment, e.g. near flammable
liquids, gas or dust. Do not use the product near flammable materials.
Do not look directly into the light source.
Do not use the product if the glass front is cracked or damaged. The product
must be discarded if the glass front is cracked or damaged.
The light source is not replaceable. The entire product must be replaced if it
stops working.
WARNING! ****
- This product becomes very hot during use. Risk of burns.
- Keep combustible materials away from the product.
- Make sure there is enough ventilation to prevent the product getting too hot.
SYMBOLS
| The product must be discarded if the glass front is cracked or damaged.
| Safety class11.
CE| Approved as per applicable directives.
| Recycle discarded product as electrical waste.
TECHNICAL DATA
- Rated voltage 230 V ~ 50 Hz
- Output 4.8W
- Safety class II
- Luminous flux 330 Im
- Colour temperature 6500 K