VIVO V2158 V25 Pro Smartphone User Guide
- June 9, 2024
- Vivo
Table of Contents
V2158 V25 Pro Smartphone
User Guide
Welcome to vivo
Please mad this Quick Start Guide before using your phone, and keep it for future reference. This Quick Start Guide tells you how to set up your phone and use its key features. For more detailed instructions, turn on your phone, then go to Settings > About phone > Customer service > Manual. You can also learn more useful information on vivo’s official website. For legal information. go to Settings > About phone > Legal information. For the FCC ID of this phone, please go to Settings > About phone > Status. The features and images shown in this guide are for reference only. They may differ from the actual product. It is recommended to charge the device for at least 30 minutes before turning it on for the first time. Optimum operating temperature is 0°C to 35°C and optimum storage temperature is -20t to 45’C . Extreme heat or cold may damage your device or accessories. The device IMEI can be obtained by dialing 11$06#.
Power button
When the phone is off, press and hold the Power button to tum it on. Press and
hold the button when the phone is on to turn the phone off or restart it.
IFT
Operation of this equipment is subject to the following two conditions: (1) it
is possible that this equipment or device may not cause harmful interference
and (2) this equipment or device must accept any interference, including
interference that may cause undesired operation
FCC statement
This device complies with part 15 of the FCC Rules .Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Caution: Changes or
modifications not expressly approved by the vivo Mobile Communication Co.,Ltd.
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class 13 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC SAR
Head: 0.99 W/kg
Body-worn: 0.93 W/kg ( 15mm distance )
Hotspot: 0.92 W/kg ( 10mm distance )
Electrical Specifications
Adapter| Input
2.5A| 100-240V∼50/60Hz
---|---|---
Output| 5V 2A/9V 2A/11V 6A Max/ 20V 4A Max
Mobile phone| 3.87V
Product Standard Accessories
Cell phone x 1
Charger x 1
USB cable x 1
Phone case x 1| Eject tool x 1
Warranty card x 1
Quick start guide x 1
Headset x 1
---|---
Earphone jack adapter x 1
SAR statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The SAR limit set by the FCC is 1.6W/kg.
For body-worn operation, this device has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and
positions the device a minimum of 15mm from the body. RF exposure compliance
with any body-worn accessory that contains metal was not tested and certified,
and use of such body-worn accessory should be avoided. Accessory available in
market and must be used to keep use distance 15mm from EUT to body-worn
operation.
**Tips:**
Insert/remove your SIM card using the provided eject tool. To avoid damaging
the device, do NOT remove the back cover. This phone supports standard nano
SIM cards. If necessary, please go to your local operator shop for a standard
nano SIM card.
Version: V1.0 5130227 FXXX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>