HEINNER HBS-150BTF Bathroom Scale User Manual

June 9, 2024
HEINNER

HEINNER HBS-150BTF Bathroom Scale User Manual

  • Bathroom scale
  • Capacity: 150kg
  • Battery: 1 x CR2032 Li
  • Color: white

INTRODUCTION

Please read this instruction manual carefully before using it and keep it for later information
This manual is conceived for offering you all of the necessary info regarding installation, using and maintenance of the machine. For a correctly and safely use of the machine, please, read this manual before installation and using.

PACKAGE CONTENTS

  • Bathroom scale
  • Instruction Manual
  • Warranty card

SAFETY MEASURES

  1. The glass platform will be slippery when it is wet. Keep it dry!
  2. Keep standing still during the course of weighing.
  3. Do not strike, shock or drop the scale.
  4. Treat the scale with care as it is a precise instrument.
  5. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical/abrasive cleaning agents.
  6. Keep the scale in cool place with dry air.
  7. Always keep your scale in horizontal position.
  8. If failed to turn on the scale, check whether battery is installed, or battery power is low. Insert or replace new battery.
  9. If there is error on display or cannot turn off the scale for a long time, please take off the battery for about 3 seconds, then install it again to remove soft-fault. If you cannot resolve the problem, please contact your dealer for consultation.
  10. Do not use it for commercial purpose.

OVERLOAD INDICATION

Scale overload (max. weight capacity is indicated on the scale). Please step off to avoid damage.

RE-TEST

Display “C” when you step off the scale, means this weight reading with error. Please re-test.

USING THE APPLIANCE


Step 1:
To make sure accuracy, place on the carpet on soft surface.
Remark: if the scale is one of our “Slim” series (indicated on package), make sure to put it on hard surface such as marble, floor tile etc. and make sure no foreign bodies beneath the scale before weighing.

USING THE APPLIANCE
Step 2:
Gently step on the scale, then the scale will be automatically turned on. Stand
evenly on the scale without moving and wait until our weight shown on display is stable and locked.

AUTOMATIC SWITCH OFF

USING THE APPLIANCE
When you step off the scale, it will automatically switch off. Auto shut-off occurs if display shows the same weight reading for approximate 8 seconds.

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric (kg) and Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1: if the unti switch is inside battery case:

A : open battery case cover on the back of scale
B : Pull up and down the unit switch to convert scale unit between kg-lb- st.


Condition 2:
if the unit switch is on the back of the scale:

A: Find unit switch on the back of scale
B: Pull up and down the unit switch to convert scale unit between kg-lb- st.


Condition 3:
if the unit switch is on the back of the scale:

A: Find unit switch on the back of scale
B : Press the unit conversion button when scale is power on, LCD shows current weight unit. Press the button again to convert weight unit

BATTERY


Type 1:
1x3V lithium battery (CR2032). Please remove the isolation sheet from the battery contact before use.


Type 2:
2×1.5V AAA batterie (excluded).

TO REPLACE BATTERY


Condition 1:
Open battery case cover on the back of scale, if battery case is the type shown in picture 1
A: take out the used battery with the aid of a cuspidal object, as shown in picture 1;
B: install new battery by putting one side of the battery beneath the battery baffle and then please take note to the polarity.


Condition 2:
Open battery case cover on the back of scale, if battery case is the type shown I picture 2
A: Pull the black tab outwards and the battery will come out
B: Install new battery by putting one side of the battery beneath the contact and then press down the other side. Please take note to the polarity.


Condition 3:
Open battery case cover on the back of scale, if battery case is the type shown in picture 3
A. Press battery gently, the battery will pop up automatically
B. Install new battery by connecting one side of battery to the positive plate first, and then pressing down the other side. Please observe the polarity


Condition 4:
Open battery case cover on the back of scale, if battery case is the type shown in picture 4.
A. Take out the used battery (with the aid of a cuspidal object, if needed)
B. Install new battery by putting one side of the battery and then pressing down the other side. Please take note to the polarity

TECHNICAL FICHE

  • Capacity: 150kg
  • Power: 1 x CR2032 Lithium
  • Color: White

Environment friendly disposal

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment’s to an appropriate waste disposal center.

HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from NETWORK ONE DISTRIBUTION.
Copyright © 2013 Network One Distibution. All rights reserved.

www.heinner.com,http://www.nod.ro
http://www.heinner.com,http://www.nod.ro

This product is in conformity with norms and standards of European Community

Importer: Network One Distribution
Marcel Iancu Street, no 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

HEINNER User Manuals

Related Manuals