VYNCO 88USBM2 USB Charger Mech Instruction Manual
- June 9, 2024
- VYNCO
Table of Contents
88USBM2 USB Charger Mech Instruction Manual
| | |
---|---|---|---
SPECIFICATIONS
| Rated Supply Voltage | 220-240V AC, 50Hz |
|---|---|
| Maximum Current | 2.1A x1or 1.05A x2 @5V DC |
| Operating Temperature | -5° to 40°C |
| ta | 40°C |
FITMENT
Indoor use only. Designed to fit all current Vynco switch gear ranges. Note fitment details below:
- 3,4,5,6 gang switch plates – maximum of 2x 88USBM2 mechs can be installed in plate.
- Positioning of mechs must retain a space between each 88USBM2 and allow complete assembly to befitted into suitable enclosure.
WARRANTY
This product is covered by the standard 5 Year Vynco Warranty – proof of
purchase is required. Please contact Vynco for details of returns procedure.
NOTE: This product contains NO user serviceable parts.
SAFETY
Suitable for use as a charging device only – DO NOT use for data transmission.
Not suitable for charging non-USB compatible devices
All wiring should be carried out by a licensed/ registered electrician or
similarly qualified person and installed according to the AS/NZS 3000 Wiring
Rules.
The 88USBM2 must be used in conjunction with an accessible isolator or MCB.
Always isolate from power before wiring or changing the USB.
The 88USBM2 product must be fitted to a wall plate and installed in a suitable
enclosure [mounting block or flush box]. The input wires are only intended as
internal wiring and should not be accessible in use.
INSTALLATION PROCEDURE
STEP 1
Securely press 88USBM2 mech into switch or socket plate.
STEP 2
Connect wiring:
WIRING
L = Live or Phase – Brown or Red
N = Neutral – Blue or Black
STEP 3
Secure switch or socket plate to suitable enclosure with screw fasteners.
STEP 4
Turn on power and test for correct operation.
VYNCO INDUSTRIES (NZ) LIMITED
CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283 F +64 3 379 6838
E [email protected]
VYNCO.CO.NZ
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051 F +64 9 525 5799
Documents / Resources
|
VYNCO 88USBM2 USB Charger
Mech
[pdf] Instruction Manual
88USBM2 USB Charger Mech, USB Charger Mech, 88USBM2 Charger Mech, Charger
Mech, USB Charger, 88USBM2
---|---