HENBAKER CY789 Digital Night Vision Scope User Manual

HORNBAKER
Digital night vision
CY789

Operation Manual

Important note

1. Do not look directly at the IR infrared fill light in a short distance, otherwise, it will cause damage to the eyes!.
2. The infrared lamp of this product will gather a lot of energy when it is on. It is strictly prohibited to aim at combustible objects in close range, otherwise, it may cause a fire. Please turn off the IR infrared lamp when it is not in use.
3. Please use a 3.7V Li-ion rechargeable battery!
4. Do not open the enclosure without permission. In case of any failure, please contact the manufacturer in time, otherwise it will be deemed as a waiver of warranty service.

① Zoom(+)
② IR brilliance control/Mode switch button
③ Menu /Photo/ Recording/ OK
④ IR brilliance control
⑤ Zoom(-)

Unpacking

This box contains night vision optics with data cable Storage care is not included. Please prepare a TF card (128g maximum) for data storage

Installation

Battery installation

Please use 3.7V 21700 lithium battery. remove battery compartment cap and make sure to set the positive polar towards to the direction inward. Put the cap back and screw it until tight.

Adjustments

Turn on the device after installing the battery At first to make sure you can see the letters or icons on the screen clearly (put the diopter lens to the slot in front of the eyepiece if the user has presbyopia). then adjust the optical zoom ring and focus ring until the view of your target is clear and sharp. switch between color mode and black&white mode. test the function of the IR illuminator under the black&white mode only.

Instructions

Turn On/Off

To turn On the device press and hold the Power Button(7) for about 3 seconds until you see the splash screen.
To turn Off the device press and hold the Power button(7) for about 3 seconds.

Sleep mode

Enter sleep mode with a short press of the power/sleep button(7) when the device is turned on.
The power indicator will keep light when the device enters sleep mode.

Optical zoom adjustment

Rotate the optical zoom adjustment ring clockwise and counterclockwise until you see your target clearly. if not, readjust the objective lens adjustment ring

The objective lens adjustment

Aim at your target, rotate the objective adjustment ring until you’ve achieved an stable and well-focused image

IR fill light brilliance control

In black and white mode, repeatedly press the IR to fill the light brilliance control button to adjust IR light brilliance among a range of 5 gears(set IR 1-5 or off). The fill light is also stretchable so that it can be pulled and pushed to the fill light. Free switch of infrared lamps between the two wavelengths of 940nm and 850nm, adaptable to varied use environments.

Red dot adjustment

Turn on the device, then turn the laser on/off with a long press of the laser menu button(6). the position of the laser can be adjusted on the laser adjustment holes by a hex nut wrench

menu operation

Enter the menu with a long press of the Menu button(3). press </> button(1/5) to select options. Enter a submenu with a short press of the OK button(3).Exit the menu with a long press of the Menu button(3)

Center Position adjustment
Enter the submenu Center Position adjustment with a short press of the ok button(3). Adjust screen

LCD Brightness
Enter the submenu LCD Brightness with a short press of the ok button(3), Select “1”,”2”,”3”,”4” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3)

WiFi
Enter the submenu WiFi with a short press of the ok button(3), Select “Off”, ”On” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3)。the default user name and passwords of WiFi are Henbaker and 12345678. The corresponding app is “VF Cam”

Camera Horizontal and vertical settings
Enter the submenu Camera Horizontal and vertical settings with a short press of the ok button(3), Select “Horizontal”,” vertical” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Auto Power Off
Enter the submenu Auto Power Off with a short press of the ok button(3), select “OFF”,”3Minutes”,”5Minutes”,”10Minutes” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Loop recording
Enter the submenu Loop recording with a short press of the ok button(3), select “OFF”,”3Minutes”,”5Minutes”,”10Minutes” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Font Size
Enter the submenu Font Size with a short press of the ok button(3), Select “Small”,” Medium”,” Big” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Record Audio
Enter the submenu Record Audio with a short press of the ok button(3), Select “Off”, ”On” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Date Stamp
Enter the submenu Date Stamp with a short press of the ok button(3), Select “Off”,” On” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Date/Time
①Manual adjustment
Enter the submenu Date/Time with a short press of the ok button(3), select one of the options with an ok button(3). select a correct value for the year, month, and date with a short press of the </> button(1/5). select “MM”,”DD”,”YY” as your date format with a short press of </> button(1/5). save the selected date and exit the submenu with a short press of the Menu button(2).

②Automatic adjustment
Time synchronization between WiFi and mobile phone

Language
Enter the submenu Language with a short press of the ok button(3), select one of the options with a short press of the </> button(1/5). confirm your selection with a short press of the OK button(3)

Format
Enter the submenu Format with a short press of the ok button(3), select “cancel”,” OK” with a short press of the </> button(1/5). Confirm your selection with a short press of the OK button(3). Please be careful, the data can not be recovered after the device is formatted.

Default Setting
Enter the submenu Default Setting with a short press of the ok button(3), select “cancel”,” OK” with a short press of </> button(1/5). Confirm your selection with a short press of the OK button(3).

Version
Look at the Version with a short press of the ok button(3)

Specifications

Warranty card

Product model:——————————————————–
Date of purchase:—————————————————–
Warranty period:——————————————————
User name:————————————————————
User phone:———————————————————–
User address:———————————————————
Warranty records:—————————————————

Warranty

This product is warranted against defects in materials and workmanship for a period of one year from the date of purchase. 1-year warranty.
This warranty is for the original purchaser only

Notice:
Do not disassemble the night vision device by yourself. If there is any trouble, please contact the factory in time. If the repair, modification, or product seal sticker is not approved by the company, it will not be covered by the warranty.
All damage caused by human factors or accidental product damage, including use in abnormal working conditions, damage caused by failure to follow the instructions and installation, is not covered by the warranty.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

http://www.szsh88888.com/cy789/index.html

Shenzhen Henbaker Industrial Co., Ltd
Address: Building g, Chihualing Industrial Zone, Guanlan,
Longhua District, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>