PHILIPS 65PUL7472 F7 7400 Series Borderless design Android TV Instruction Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS 65PUL7472 F7 7400 Series Borderless design Android TV
Safety instruction
Register online at www.philips.com/welcome
today to get the most benefits from your purchase. Registering your model with
Philips makes you eligible for all of the valuable benefits listed below,
so don’t miss out.
Register Online at www.philips.com/welcome to
ensure:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The caution marking is located on the rear or bottom of the cabinet The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus. The symbol for CLASS II or double insulated electrical apparatus. This apparatus has been designed in such a way that it does not require a safety connection to the electrical earth.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
CHILD SAFETY
PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES
-
Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable. -
As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
- ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
- ALWAYS read and follow all instructions for proper use of your television.
- NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
- NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
- ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
- ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
- ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.
- ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).
- ALWAYS follow all instructions supplied by the television and mount manufacturers.
- ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.
- Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
- Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.
- ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.
- NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.
- ALWAYS make sure your older CRT television does not hang over the edge of your furniture.
Important safety instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820 of the NEC,
ANSI/NFPA 70 and Section 54 of the CEC, Part I that provides guidelines for
proper grounding and,
in particular, specifies that the cable ground shall be connected to the
grounding system of the
building, as close to the point of cable entry as practical.
Example of antenna grounding as per NEC – National Electric Code
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the NEC, ANSI/NFPA 70 and Section 54 of CEC, Part I provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Notice
Trademarks are the property of Koninklijke Philips N.V. or their respective
owners. Funai Corporation reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly. The material in
the document is believed adequate for the intended use of the system. If the
product or its individual modules or procedures are used for purposes other
than those specified herein, confirmation of their validity and suitability
must be obtained. Funai Corporation warrants that the material itself does not
infringe any United States patents. No further warranty is expressed or
implied. Funai Corporation can be held responsible neither for any errors in
the content of the document nor for any problems as a result of the content in
the document. Errors reported to Funai Corporation will be adapted and
published on the Funai Corporation support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has effective
pixels of 99.999 % or more,
black dots or bright points of light (red, green or blue) may appear
constantly on the screen. This is a
structural property of the display (within common industry standards) and is
not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to the inside
of the product. Repairs may only be done by service centers and official
repair shops. Failure to do so shall void any warranty, stated or implied. Any
operation expressly prohibited in the document, any adjustments or assembly
procedures not recommended or authorized in the document shall void the
warranty. The following FCC/IC RSS applies to the wireless LAN adapter
included in this product.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment. This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
FCC/IC RF Exposure Compliance
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20 cm
or more away from your body. This device complies with Part 15 of FCC Rules
and Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of this device. 5150-5250 MHz band is restricted to
indoor operations only. High-power radars are allocated as primary users
(i.e.priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or damage to LE-LAN devices.
Compliance with FCC requirement 15.407(c) and IC requirement RSS210A9.4.4
Data transmission is always initiated by software, which is passed down
through the MAC, through the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns off at the end of the packet. Therefore, the transmitter will be on
only while one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinues transmission in case of either
absence of information to transmit or operational failure.
Positioning the TV
- Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
- Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
- Install the unit in a horizontal and stable position.
- Do not install the unit in direct sunlight or in a place subject to dust or strong vibration.
- Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
- When installing this unit in a temperate environment, avoid a place with rapid temperaturechanges. – Operating temperature: 41°F (5°C) to 104°F (40°C)
- This unit should not be used in a tropical environment as it has not been evaluated under such conditions.
- No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.
- Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.
- Do not insert the AC power cord into the power socket outlet before all the connections are made.
- Ensure that you always have easy access to the AC power cord and outlet to disconnect the TV from the AC outlet.
- Before you move the TV, disconnect attached cables to prevent damage to connectors, especially the TV tuner.
- Be sure to unplug the AC power plug from the AC outlet before moving or carrying the unit.
- When moving the TV and then setting it down, please be careful not to pinch the AC power cord under the unit.
Regulatory notices
WARNING: To prevent injury, this apparatus must be securely attached to
the furniture/wall in accordance with the instructions. Tipping, shaking or
rocking the unit may cause injury/death.
Stability Hazard
A television set may fall, causing serious personal injury or death. Never
place a television set in an unstable location. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
- Always use cabinets, stands or mounting instructions recommended by the manufacturer of the television set.
- Always use only furniture that can safety support the television set.
- Always ensure the television set is not overhanging the edge of the supporting furniture.
- Always educate children about the dangers of climbing on furniture to reach the television set or its controls.
- Certainly wire the cords and cables connected to television set that cannot be routed, pulled and pinched.
- Not placing the television set on unstable place.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
- Not placing anything such as toys or controls that tempts children on a TV or furniture which a TV is placed
If the existing television set is going to be retained and relocated, the same considerations as above should be applied. Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth, curtain, newspaper, etc. Make sure that there is enough ventilation space (4 ” / 10 cm or more) around this unit. Press to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power plug from the AC power outlet. Disconnect the AC power plug to shut the unit off when trouble is found or not in use. The AC plug shall remain readily available
Never use a gas duster on this TV. The gas trapped inside of this unit may
cause ignition and explosion.
Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit – www.recycle.philips.com
End of life directives
Philips pays a lot of attention to produce environmental-friendly products in
green focal areas.
Your new TV contains materials which can be recycled and reused. At the end of
its life, specialized
companies can dismantle the discarded TV to concentrate the reusable materials
and to minimize the
number of materials to be disposed of. Please ensure you dispose of your old
TV according to local
regulations.
Batteries usage
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or
equivalent type.
WARNING: Batteries (battery pack or battery installed) should not be
exposed to excessive heat
such as sunshine, fire or the like.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,
Li-ion, etc.) batteries.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and cadmium,
however in certain localities, disposing batteries with household waste is not
permitted. Please ensure you dispose of batteries according to local
regulations. Downloading an owner’s manual
To obtain a more detailed owner’s manual of document:
- Point your browser to : www.philips.com/support
- Choose your country of location with language.
- Enter the product name or number in the search field. Alternatively, you can browse the catalog.
- Click the Description or Model.
- Under Product support, click “User manual”.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing for children
younger than two years of age. Some apps are not pre-installed, internet
connection is required for download. Some features may require an always-on
broadband internet connection, firmware update and/or a minimum bandwidth.
Internet services vary by location. Funai Corporation Inc. does not warrant
access to the portal or to any of the services, content, software and
advertising. Funai Corporation Inc. may, in its sole discretion, add or remove
access to any specific services, content, software and advertising at any
time. Although Funai Corporation Inc. will strive to provide a good selection
of services, content or software, Funai Corporation Inc. does not warrant
continued access to any specific services, and content or software. Funai
Corporation Inc. does not warrant Wireless Screencasting compatibility with
all source devices such as smartphones, tablets, laptops, etc. due to large
variability in hardware, firmware, drivers, software and implementation of
wireless casting applications on these source devices. Although Funai
Corporation Inc. will strive to enhance compatibility and performance across a
range of source devices, Funai Corporation Inc. does not warrant compatibility
with specific source devices
Limited warranty
Warranty coverage:
This warranty obligation is limited to the terms as set forth below.
Who is covered:
This product warranty is issued to the original purchaser or the person
receiving the product as
a gift against defects in materials and workmanship as based on the date of
original purchase
(“Warranty Period”) from an Authorized Dealer. The original sales receipt
showing the product
name and the purchase date from an authorized retailer is considered such
proof.
What is covered:
This warranty covers new products if a defect in material or workmanship
occurs and a valid claim is received within the Warranty Period. At its
option, the company will either (1) repair the product at no charge, using new
or refurbished replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts
and is at least functionally equivalent or most comparable to the original
product in current inventory, or (3) refund the original purchase price of the
product. Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the date of the
replacement or repair for ninety (90) days or for the remaining portion of the
original product’s warranty, whichever provides longer coverage for you. When
a product or part is exchanged, any replacement item becomes your property and
the replaced item becomes company property. When a refund is given, your
product becomes company property.
Note: Any product sold and identified as refurbished or renewed carries a
ninety (90) day limited warranty. Replacement products can only be sent if all
warranty requirements are met. Failure to follow all requirements can result
in delays.
What is not covered – Exclusions and limitations:
This Limited Warranty applies only to new company-manufactured products that
can be identified by the trademark, trade name, or logo affixed to it. This
Limited Warranty does not apply to any hardware product or any software, even
if packaged or sold with the product, as manufacturers, suppliers, or
publishers may provide a separate warranty for their own products packaged
with the bundled product. The company is not liable for any damage to or loss
of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this
warranty. Recovery or reinstallation of programs, data or other information is
not covered under this Limited Warranty. This warranty does not apply (a) to
damage caused by accident, abuse, misuse, neglect, misapplication, or non-
supplied product, (b) to damage caused by service performed by anyone other
than company-approved Authorized Service Location, (c) to a product or a part
that has been modified without written company permission, or (d) if any
serial number has been removed or defaced, or (e) product, accessories or
consumables sold “AS IS” without warranty of any kind by including refurbished
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
- Shipping charges to return the defective product.
- Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.
- Product repair and/or part replacement because of improper installation or maintenance, connections to the improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.
- Damage or claims for products not being available for use, or for lost data or lost software.
- Damage from mishandled shipments or transit accidents when returning product.
- A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
- A product used for commercial or institutional purposes (including but not limited to rental purposes).
- Product lost in shipment and no signature verification receipt can be provided.
- Failure to operate per document.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations orexclusions may not apply to you. This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Funai Service Corporation 2425 Spiegel Drive, Groveport, OH 43125, USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>