OPTONICA LED Solar Bulb User Manual

OPTONICA LED Solar Bulb

List

1. Solar light

2. Solar panel
   

3. Remote control Batteries
   

4. screws
   

5. Cables with USB interface
   

6. 5m wire
   

Remote control key instructions

Instructions

Important

1. Please check the lights before installation whether it is working properly.

2. Press the button of the light before you use If you press “AUTO” (red button) means enter the day-night sensor mode, the light will auto “NO” at night, and auto “OFF” during the day;
   Note: The remote control must be towards the control receiver of the light.

3. Remote control distance is 8-10m.

4. A – Fix the lamp on the place you want, but please avoid the water.
   B – The solar panel should adjust the angle towards the sunshine.
   C – Lamps cannot be installed in low-lying area, avoid water going inside.

5. Connected the plugs, then enter into charging mode.

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>