Govee H6119 RGBIC Car LED Strip Lights User Manual

Govee H6119 RGBIC Car LED Strip Lights

At a Glance

• LED Strip Lights 4
• Control Box 1
• Car Cigarette Lighter 1
• RF remote 1
• User Manual 1

Specifications

Length 4 x 30cm / 4 x 0.98ft
Lighting Color RGBIC
Power Supply Car Cigarette Lighter
Voltage 12VDC
Control Method Govee Home App,RF Remote
Working Temperature -10°C – 45°C (14°F-113°F)

Installing Your Strip Lights

1. Preparation Before Installing

2. a. Unpack the box and check all items listed in the packing list.

3. b. Power on the strip lights and check whether they light up.

4. Installing Steps

5. a. Wipe the installing surface to make sure it’s clean and smooth.

6. b. Install the cigarette lighter and control box in the central console.

7. c. Peel off the protective film and stick the strip lights as indicated in the picture.
   

8. d. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws.

9. e. Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on.

Controlling with the Control Box

Controlling by RF remote control

Downloading the Govee Home App

Download the Govee Home app from App Store (iOS devices) or Google Play (Android devices).

Connecting the Strip Lights to the App

1. Turn on Bluetooth in your mobile phone.
2. Open Govee Home app and tap “+” icon in the top right corner.
3. Select “H6119” in the device list.

Troubleshooting

1. The LED strip doesn’t turn on
   a. Please make sure the cigarette lighter is power on.
   b. Please make sure the cigarette lighter is well connected with power plug.
   c. There is a button on the cigarette lighter. Please make sure it is pressed, and the LED strip will be energized if button is red.

2. The LED strip stops working after using for a period
   a. Please make sure the cigarette lighter is well connected with power plug.
   b. Please open the APP to make sure the strip light is switched on.
   c. Open the cover of the cigarette lighter and take out the fuse to check whether it’s burned.
   e The adhesive is not sticky
   a. Please clean and dry the surface of the object where the strip needs to be installed.
   b. Please put the LED strip on the clean surface, and press it firmly for 15 seconds to make sure it is sticky.
   c. Moreover, please screw the LED strip to prevent it falling off.

3. Cannot connect to APP
   a. Please turn on the Bluetooth of your cellphone.
   b. Please make sure it is connected to the Bluetooth according to the APP instructions.
   c. If the phone is not compatible, please replace the phone and reconnect the LED strip.
   d. Please unplug the adapter for nearly 1 0minutes and replug it in to retry.
   e. Please make sure the device is in the Bluetooth range of your cellphone
   f. Please make sure there is no obstacles between product and your cellphone.

4. The control box doesn’t work
   a. Please unplug the cigarette lighter and then plug it back.
   b. Please control the strip light through app and check if you can adjust color and brightness.

FCC Statement

This device complies with Part 15 of the FCC Rules .
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu.nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/lV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com

Contact information: https://www.govee.com/support
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co.,Ltd. is under license.

Govee is a trademark of Shenzhen lntellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech Co., Ltd. All Rights Reserved.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee @Govee @Govee @Goveeofficial

Govee Home App

For FAQs and more information,
please visit: www.govee.com

LET’S CONNECT

Inspire & Be Inspired
– Share your creations on social media.
– Connect with our active Govee Community.
– Discover new ideas for using your products.

NEED HELP?

Contact us anytime!

Support@govee.com
Report an issue on the app
Rapid Replacement on the app

Join Govee Home

Download Govee Home App for new releases, user events, and more.

References

• Govee - Making Life Smarter
• Govee - Making Life Smarter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>