Linksys EA7500 Dual-Band Wi-Fi Router Instruction Guide
- June 9, 2024
- Linksys
Table of Contents
Linksys EA7500 Dual-Band Wi-Fi Router
Product Overview
Top view
Iluminated Linksys logo-The Linksys logo stays on steadily while connected to the Internet. It flashes or pulses slowly during startup, self-testing and firmware upgrades. It flashes quickly when indicating connection errors.
Back view
Adjustable antennas (1)-For best performance, position the antennas
vertically as shown in the drawing.
USB 3.0port (2- Connect and share a USB drive or USB printer on your network or on the Internet.
Internet port (3)- Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband Internet cable/DSL or fiber modem.
Note
For best performance, use CAT5e or higher rated cables on the Internet ports.
Ethernet ports(4)- Connect Ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network.
Note
For best performance, use CAT5e or higher rated cables on the Ethernet
ports.
Power port (5)- Connect the included AC power adapter.
USB 2.0 port (6)- Connect and share a USB drive or USB printer on your network or on the Internet. Wi-Fi Protected Setup” button (71-Press to configure wireless security on Wi-Fi Protected Setup- enabled network devices.
Reset button (8)- Press and hold for until the power LED starts flashing to reset the router to factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the Internet or mobile app.
Power switch (9- Press| (on) to turn on the router.
Setting Up: Basics
Where to find more help
In addition to this user guide, you can find help at these locations:
- Linksys.com/support/EA7500 (documentation, downloads, FAQs, technical support, live chat, forum
- Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the Screen)
Note
Licenses and notices for third party software used in this product may be
viewed on http://support.linksys.com/en-us/license Please contact
http://support.linksys.com/en:
us/gplcodecenter for questions or GPL source code requests.
How to install your router
-
If replacing an existing router, disconnect that router first
-
Attach antennas and turn them up. Plug in your router to a power source and press the power switch to | (on).
-
Connect the Internet cable from your modem to the yellow lnternet port on your router. Wait until the indicator light on your router is solid.
-
Connect to the secure wireless name shown in the Quick Start Guide that came with your router.(You can change the network name and password later,) If you need help connecting to the network refer to your device documentation on the provided CD.
Note-You will not have Internet access until router setup is complete. -
Open a web browser to launch the Linksys Smart Wi-Fi Router setup instructions. If you don’t see the instructions, type linksyssmartwifi.com in the address bar.
At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to configure your router from any computer with an Internet connection.
Manage your router’s settings:
- Change your router’s name and password
- Set up guest access
- Configure parental controls
- Connect devices to your network
- Test your Internet connection speed
Note
As part of Linksys Smart WFFi account setup, you will be sent a
verification e-mail. From your home network, click the link in the email to
associate your router with the Linksys Smart Wi-Fi account.
Tip
Print this page, then record your router and account settings in the table
below as a reference. Store your notes in a safe place.
How to Use Linksys Smart Wi-Fi
You can configure your router from anywhere in the world by using Linksys Smart W-Fi, but you can also configure your router directly from your home network. Linksys Smart Wi-Fi may be available for your mobile device, as well. See your device’s app store for information.
How to connect to Linksys Smart Wi-Fi
To connect to Linksys Smart Wi-Fi:
- Open your computer’s web browser.
- GatawnAAA linkaueemartuifi.comandlaa intavaur account.
If you cant remember your password, click Forgot your password? and follow the o-screen instructions to recover it.
Network Map
Lets you display and manage all network devices connected to your router. You
can view devices on your main network and your quest network, or display
information about each device.
Guest Access
Lets you configure and monitora network that guests can use without accessing
all of your network resources.
Parental Controls
Lets vou block web sites and set Internet access times.
Media Prioritization
Lets you set which devices and applications have top priority for your network
traffic.
Speed Test
Lets you test your network’s Internet connection speed
External Storage
Lets you access an attached USB drive (not included) and set up file sharing,
a media server, and FTP.
Connectivity
Lets vouconfiaura basic and advanced network setting.
Troubleshooting
Lets you diagnose problems with your router and check the status of the
network.
Wireless
Lets you configure your router’s wireless network. You can change the security
mode, password, MAC filtering, and connect devices using Wi-Fi Protected
Setup”
Security
Lets you configure your router’s wireless security. You can set up the
firewall, VPN settings, and make.custom seftinas for annlicafions and.aames
Troubleshooting
You can find more help from our awarc-winning customer support at Linksys.com/support/EA7500.
Your router was not successfully set up
If Linksys Smart W-Fi did not complete the setup, you can try the following:
- Press and hold the Reset button on your router with a paperclip or pin until the LED starts blinking (about 10 seconds). Install the router again.
- Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again.
- If you have another computer, use that computer to install the router again.
Your Internet cable is not plugged in message
If you get a “Your Internet cable is not plugged in” message when trying to
set up your route, follow these troubleshooting steps
- Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.
- Make Sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or I (as opposed to O) position.
- If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP,
- If your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.
- It your computer was previously connected to your modem with a UsB cable, disconnect the USB cable.
- Install the router again.
Cannot access your router message
To access your router, you must be connected to your own network. If you
currently have wireless Internet access, the problem may be that you have
accidentally connected to a different wireless network.
To fix the problem on Windows computers, do the following’:
- On your Windows desktop, click on the wireless icon in the system tray. A list of available networks will appear
- Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named wraith 5GHz. The wireless network name of the Linksys EA7500 router. Damaaed Beez2.4 in this example, is shown selected.
- IT yOu are prompted to enter a network security key, type your pasSWord (security key) into the network security key field. Click OK.
- Your computer will connect to the network, and you should be able to access the router.
Depending on your version of Windows, there could be some differences in wording or icons in these steps.
To fix the problem on Mac computers, do the following:
-
In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. Linksys Smart W-Fi has automatically assigned your network a name.
-
In the example below, the computer was connected to another wireless network named wraith 5GHz. The wireless network name of the Linksys EA7500 router, Damaged Beez2.4 in this example, is shown selected.
-
Click the wireless network name of your Linksys EA7500 router (Damaged Beez2.4 in the example).
-
Type your wireless network password (Security Key into the Password field Click OK.
After setup
The Internet appears to be unavailable
If the Internet has difficulty communicating with your router, the problem may appear as a “Cannot find Internet address/” message in your Web browser. If you know that the Internet address is correct, and if you’ve tried several valid Internet addresses with the same result, the message could mean that there’s a problem with your ISP or modem communicating with your router.
Try the following
- Make sure that the network and power cables are securely connected.
- Make sure that the power outlet that your router is connected to has power.
- Reboot your router.
- Contact your ISP and ask about outages in your area.
The most common method of troubleshooting your router is to turn it off, then back on again. Your router can then reload its custom settings, and other devices (such as the modem) will be able to rediscover the router and communicate with it. This process is called rebooting.
To reboot your router using the power cord, do the following
- Disconnect the power cord from the router and the modem.
- Wait 10 seconds, and reconnect the power cord to the modem. Make sure it has power.
- Wait until the modem’s online indicator has stopped blinking fabout two minutes). Reconnect the power cord to the router.
- Wait until the power indicator stops blinking. Wait two minutes before trying to connect to the Internet from a computer.
To reboot your router using Linksys Smart Wi-Fi, do the following:
-
Log in to Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart W-Fi” on page 9)
-
Under Router Settings click Troubleshooting
-
Click the Diagnostics tab.
-
Under Reboot click Reboot
-
Click Yes. The router will reboot. While the router is rebooting, all connected devices will lose their Internet connection, and will automatically reconnect when the router is ready again.
Linksys Smart Wi-Fi does not open in your web browser
The latest versions of Google Chrome, FirefoxeB, Safarie (for Mace and iPade),
Microsoft Edge, and Internet Explorer® version 8 and newer work with Linksys
Smart Wi-Fi.
Specifications
Linksvs FAZ500
Environmental
Notes
For regulatory, warranty, and satety information, see the CD that came with
your router o go to Linksys.com/support ea7500.
Specifications are subject to change without notice.
Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licens and notices for third party software used in this product may be viewed here: http://[support.linksys.com/en- us/license](http://support.linksys.com/en-us/license). Please contact http://[support.linksys.com](http://support.linksys.com)/en us/gplcodecenter for questions or GPL source code requests.
2016 Belkin International, Inc. and/or its affiliates. All rights reserved.
Frequently Asked Questions
How do I reset my router to the factory default settings?
Resetting your router will erase all settings you have configured and return them to factory defaults. Unplug the power cord from the back of the router. Wait 10 seconds, then plug it back in. Press and hold the Reset button on the back of the router for 30 seconds, then release it. Wait until the Power LED starts flashing slowly (about one second on, one second off). Press and hold the Reset button again for 30 seconds, then release it. Wait until the Power LED starts flashing slowly (about one second on, one second off). Release the Reset button, then wait for about 30 seconds for your network to be restored to factory default settings.
Does this router require a service to be used?
Technically, you don’t, though. Any router may be configured to interact with other computers or networked devices (such as printers, scanners, etc.). You do need internet service if you anticipate having access to the internet.
Without a Linksys cloud account, can I setup this router? Anyone with access to my network is not someone I would trust.
Yes. I too did it for the same motive.
Does it work with Windows 10?
Yes, it works with Windows 10. I have Windows 10.
The WPS button cannot be found?
toward the rear. It is the only button that may be pressed with your finger in addition to the on/off switch. (There is a hidden button that needs a pencil, paperclip, etc. to reset it. The WPS button is not it.)
Can I use Centurylink DSL with the Linksys EA7300?
It ought to function, but to be clear, it just functions as a WiFi router; you will still need a modem from your provider.
How can I increase the range of my wifi signal?
Use of the Linksys AC 1900+ range extender is the best and only method I am aware of for effortlessly extending the range without the need for a second SSID.
Does this replace the fibre router from AT &T? For example, can it accept the signal directly from the wall box device?
Yes, the Linksys EA9300 tri-band router, which you can connect directly to the modem/gateway, may take the place of your current router.
Can this be mounted on my ceiling?
Yes. This device may be mounted to the ceiling.
Does this take the position of AT &T’s standard modem?
The Linksys EA7300 is not a general-purpose router. For its internet connection, a modem is still necessary.
Right now, I’m using a Netgear 06 router. Will I Need to Buy a Modem If I Buy This Linksys AC1750?
It all depends on whether your old Netgear router served as both a modem and a router. In such instance, a modem would really be necessary. There is no built-in modem with the Linksys 1750. Additionally, I recommend speaking with your ISP provider to find out which modem is compatible with their network.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>