kogan SLORLAWBDNA Shangri-La Orlando Wood Bed User Guide
- June 9, 2024
- Kogan
Table of Contents
kogan SLORLAWBDNA Shangri-La Orlando Wood
COMPONENTS
Hardware
ASSEMBLY
-
Step 1: Align an M bracket with one part labelled 1. Using a Phillips screwdriver (not supplied), secure K screws through the holes on the M bracket. Secure A into the middle hole either side of part 1. Repeat this process with the remaining part labelled 1. This will create two end assemblies.
Note: Do not use power tools to assemble this bed as it may damage the components.
-
Step 2: Ensuring the hole on B is facing outward, secure B into one part labelled 2. Insert C into B as shown below.
Repeat this process with the remaining part labelled 2. This will create two side assemblies.
-
Step 3: Align the holes on end assemblies and connect them to the side assemblies. This will result in C to protrude through the holes on the top of the side assemblies.
Inside one top hole, insert D, E and F over C. Using the G wrench, tighten F to secure into place. Repeat this process with the remaining seven top holes. -
Step 4: Ensuring N is facing down, align and insert N into the holes shown in the example below. Using a Phillips screwdriver (not supplied), secure N with J screws.
-
Step 5: Align part 3 with the parts labelled 5. Using the H Allen key, secure with L screws. This will create the middle assembly.
-
Step 6: Using a Phillips screwdriver (not supplied), secure the middle assembly to the end assemblies with K screws.
Twist and secure parts labelled 4 as shown below.
-
Step 7: Using a Phillips screwdriver (not supplied), secure parts labelled 6 onto the bed with J screws.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>