anslut 006052 Digital Safety Timer Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 006052 Digital Safety Timer
SAFTY INSTRUCTIONS
- For indoor use only.
- Do not connect two or more timers together.
- Do not connect appliances that need a current of more than 8 amps.
- Do not connect appliances with an output of more than 1800 W.
- check that the plug on the connected appliance is fully inserted into the socket on
- If the timer needs cleaning, unplug it from the mains and wipe it with a dry cloth.
- Do not immerse the timer in water or any other liquid.
- Do not connect heaters and other similar equipment to the timer.
- Check that the appliance to be controlled is switched off before plugging it into the timer.
TECHNICAL DATA
- Rated voltage 230V~50Hz
- Max load 1800W
- Amperage Max 8A
DESCRIPTION
- Buttons to set countdown period
- Reset
- Switch for manual start/stop
- Status light for an/off mode FIG. 1
USE
FUNCTIONS
HOW TO USE
-
Plug the appliance into the timer.
-
Check that the timer is switched off and plug the timer into a power point
-
Start the connected appliance.
-
Press the button on the timer for the required countdown period
-
The connected appliance starts and then switches off when the set time has counted down 6 Press the switch to start/stop the connected appliance manually. The switch cancels the countdown mode
-
Pressing the switch when the timer is in countdown mode cuts the power to the connected appliance until the switch is pressed again.
-
Pressing a button for another countdown period during a countdown stops the countdown and the new countdown starts.
NOTE:- A new setting must be made when the set time has been counted down. The last setting is not repeated automatically.
- The status light flashes to show an active countdown setting.
DIGITAL SAFETYTIMER
OPERATING INSTRUCTIONS Important! Read the user instructions carefully before
use. Save them for future reference.
(Translation of the original instructions).