SILVERSTONE FARA 312 High Airflow and High Capacity MATX Gaming Chassis Instruction Manual

SILVERSTONE FARA 312 High Airflow and High Capacity MATX Gaming Chassis

Accessory Content

www.silverstonetek.com

INSTALLATION

Remove side panels

Install motherboard (if the I/O shield is integrated with the motherboard, please skip step 1)

Install PSU

Install graphics card

1. Loosen the screw, shift the PCI bracket cover to the left
2. Then remove the PCI bracket cover
3. Install the graphics card
4. Shift the PCI bracket to the right, then secure it with screws

There are two positions to install the drive cage

Install 3.5” and 2.5” devices into the drive trays, then insert them into the bottom drive cage

Install 2.5″ devices

Connect front I/O cables

Install side panel

OPTIONAL INSTALLATION

Install fans

Install radiators

COMPONENT RESTRICTIONS

CPU cooler height limit is 173mm, cooler is allowed to protrude the edge of the motherboard by 18mm

PSU depth limit is 170mm

Length:
365mm (incl. front 25mm thickness fan installed) 350mm (applies only to 120mm front fans when installed between the front panel and chassis)
Width: 182mm

Warranty terms & conditions

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages
   with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.

2. Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.

3. Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)

4. Product is not modified or components replaced resulting in out of spec. operation.

5. Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

6. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

7. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

8. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser

9. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

10. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.

Please note that:

1. You must provide proof of original purchase of the product by a dated itemized receipt;
2. You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service;
3. Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone.

Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com. for the latest updates.

Additional info & contacts

For North America usasupport(at)silverstonetek.com
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. http://silverstonetek.com/contactus.php

For Australia only support(at)silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details. SilverStone
Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply)
For Europe support.eu(at)silverstonetek.de
For China support(at)silverstonetek.com.cn
For Japan support_jp(at)silverstonetek.co.jp
For all other regions support(at)silverstonetek.com

Please refer to SilverStone website for latest specifications updates.

SilverStone Technology Co., Ltd.
www.silverstonetek.com
support@silverstonetek.com

References

• 無標題文件
• Support.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>