ET2 Lighting E20468 Signature LED Pendant Instruction Manual

: June 4, 2024
: ET2 Lighting

Table of Contents

Before Getting Started
Lamp Care Instructions
Cleaning & Maintenance
CRITICAL INSTRUCTION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PR DUCT NAME: Signature LED Pendant
ITEM NUMBER: E20468

Please consult a qualified electrician for hanging xture and wiring.

Light urce: LED Integrated 64W
Made in China/Hech en China/Fabrique en China

Before Getting Started

Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to position the item. Do not over-tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges. For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contects

Before getting, started, ensure the package contains following components

| |
---|---|---
| |
| |
| |

CRITICAL INSTRUCTION

Trtac Dlmmera
This fixture must be Installed with compatible dimmer types only.
Improper wiring of fixture and/or use of Incorrect dimmers will cause catastrophic fallure and void the warranty.

E20468

For Optimal Use
Triac For example,
Lutron DVELV-300P &
Lutron DVELV-153P
Lutron DVELV-300P| DO NOT USE
0-10V or magnetic dimmer| IMPORTANT
Make sure that your dimmabie LED fixture is palred
with the correct dimmer type
---|---|---

SCHEMATIC FOR GENERAL REFERENCE ONLY
Refer to dimmer manufacturer’s Instruction for proper Inataliation.

Must be installed by a licensed electrician with knowledge of electronic lighting systems.
© 2019 MAXIMGROUFCO