kogan KDCMPTNT3PA Camping Tent 3 Persons User Guide
- June 9, 2024
- Kogan
Table of Contents
KDCMPTNT3PA Camping Tent 3 Persons
User Guide
CAMPING TENT
3 PERSONS
KDCMPTNT3PA
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use.
- This tent is designed to be a temporary structure. Do not use this tent as a permanent dwelling.
- Keep the tent away from all flames heat sources to avoid potential damage.
- Do not store flammable liquids inside the tent.
- Do not spray the tent with insecticides. They can be flammable and may damage the tent’s material.
- Ensure the area the tent is set up is clear of sharp objects and obstructions to avoid damage to the material.
- Do not pitch the tent under trees due to the potential of lightning strikes and falling tree branches.
- Do not pitch the tent near a cliff.
- Do not leave the tent pitched in the face of strong winds. Disassemble the tent before seeking refuge.
- Ensure all pegs are fully secured before using the tent.
- Do not cook inside the tent.
- Do not smoke inside the tent.
- If wet, always allow the tent to dry before storing in the carrying bag to prevent the growth of mildew.
COMPONENTS LIST
- Tent body (x1)
- Fly (x1)
- Tent pole (x2)
- Peg (x12)
- Guy rope (x4)
- Carry bag (x1)
ASSEMBLY
Step 1: Ensure you are in a flat open area clear of any obstructions. Remove
and lay out all components from carry bag.
Step 2: Stretch the tent body
flat on the ground.
Step 3: Unfold and connect the joints of one tent pole. Repeat this
process with the other tent pole.
Step 4: Insert one end of a tent pole into a pin located at the
corners of the tent body.
Secure the other end of the tent pole to the pin located at the corner
diagonally opposite.
Repeat this process to the other tent pole with the two remaining pins.
Once secured, pull up both tent poles. They should resemble a dome shape,
intersecting each other in the centre.
Step 5: Tie the string from the centre of the tent body to the
intersection of the two tent poles.
Step 6: Clasp the plastic hooks located on all four sides of the tent body
to the tent poles.
This completes the assembly of the tent body.
Step 7: To secure the fly, attach the hooks on each corner of the
fly to the metal rings located on each corner of the tent body. 
Step 8: Further secure the fly by tying the hook and loop strips
located on the four sides of the fly to the tent poles.
Step 9: Secure the tent down by inserting pegs onto the four corners of
the tent. Tent assembly is now complete.
Note:
The guy ropes may also be used to further secure the tent to the ground during
windier conditions.
DISASSEMBLY
Step 1: Remove all pegs from the four corners of the tent.
Step 2: Detach the hooks located on the fly from the metal rings on
each corner of the tent body. Step 3: Detach the hook and loop strips located
on the fly from the poles.
Step 4: Remove the fly from the tent
body.
Step 5: Unclasp the plastic hooks on all four sides the tent body
from the tent poles. 
Step 6: Untie the string on the top of the tent
body from the tent poles.
Step 7: Release the ends of each tent pole from the metal pins.
Remove the two tent poles from the tent body. 
Step 8: Fold the two tent poles up back to their original state.
Step 9: Fold up the tent body and place all components back into the
carry bag.
DIMENSIONS
| Height (A): | 140cm |
|---|---|
| Width (B): | 220cm |
| Depth (C): | 220cm |
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>