ASRock IMB-1713 ATX Motherboard User Guide

IMB-1713 ATX Motherboard
User GuideI

IMB-1713 ATX Motherboard

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United  States and other countries.

Revision History

Jumpers and Headers Setting Guide

Chassis FAN Connectors (+12V)

1. CHA_FAN1

2. ATX 12V Power Connector

3. CHA_FAN3

4. M.2 Key-M Socket (M2_M1)
   Pin| Signal Name| Signal Name| Pin
   ---|---|---|---
   2| +3.3V| GND| 1
   4| +3.3V| GND| 3
   6| NA| NA| 5
   8| NA| NA| 7
   10| LED| GND| 9
   12| +3.3V| NA| 11
   14| +3.3V| NA| 13
   16| +3.3V| GND| 15
   18| +3.3V| NA| 17
   20| NA| NA| 19
   22| NA| GND| 21
   24| NA| NA| 23
   26| NA| NA| 25
   28| NA| GND| 27
   30| NA| NA| 29
   32| NA| NA| 31
   34| NA| GND| 33
   36| NA| NA| 35
   38| NA| NA| 37
   40| SMB_CLK| GND| 39
   42| SMB_DATA| PERn0| 41
   44| NA| PERp0| 43
   46| NA| GND| 45
   48| NA| PETn0| 47
   50| PERST#| PETP0| 49
   52| CLKREQ#| GND| 51
   54| NA| PEFCLKn| 53
   56| NA| PEFCLKp| 55
   58| NA| GND| 57
   Mechanical Key
   68| NA| NA| 67
   70| +3.3V| PEDET| 69
   72| +3.3V| GND| 71
   74| +3.3V| GND| 73
   | | GND| 75

5. CPU FAN Connector (+12V)

6. USB 2.0 Connector (USB2_9)

7. PWR LOSS Jumper (PWR_LOSS1)
   Open : No Power Loss
   Short : Power Loss

8. 24-pin ATX Power Input Connector

9. CHA_FAN2

10. USB 3.2 Gen1 Header (USB3_3_4)

11. SATA3 Connectors (SATA3_1 ~ SATA3_4)

12. 5-pin Thunderbolt AIC Connector (TB1)
    PIN| Signal Name
    ---|---
    1| TB_FRC_PWR
    2| TBCIO_PLUG_EVENT_R2
    3| SLP_S3#
    4| TBT_SLP_S5_S4#
    5| GND

13. Clear CMOS Headers
    CLRMOS1 :
    1-2 : Normal
    2-3 : Clear CMOS CLRMOS2 :
    Open : Normal
    Short : Auto Clear CMOS (Power Off)

14. COM Port Headers (COM3~6) (RS232)

15. ATX/AT Mode Jumper (SIO_AT1)
    Open : ATX Mode
    Short : AT Mode

16. Chassis Intrusion Headers (CI1, CI2)
    CI2 :
    Open : Active Case Open
    Short : Normal CI1 :
    Open : Normal
    Short : Active Case Open

17. PWR_COM3 (For COM Port3)
    PWR_COM4 (For COM Port4)
    PWR_COM5 (For COM Port5)
    PWR_COM6 (For COM Port6)
    1-2 : +5V
    2-3 : +12V

18. Printer Port / GPIO Header (LPT_GPIO1)
    Printer Port:  GPIO:

• If you want to use the printer port function, please short pin4 and pin5 on Digital Input / Output Power Select (JGPIO_PWR1).

  19. ESPI Header
  20. Digital Input / Output Power Select
      (JGPIOPWR) (JGPIO_PWR1)
      1-2 : +12V
      2-3 : +5V 3-4 : +5V
      4-5 : GND

• If you want to use the printer port function, please short pin4 and pin5 on Digital Input / Output Power Select (JGPIO_PWR1). 21. Digital Input / Output Default Value
  Setting (JGPIO_SET1)
  1-2 : Pull-High
  2-3 : Pull-Low

  22. USB 2.0 Header (USB2_7_8)

  23. System Panel Header

  24. SPDIF Header

  25. Front Panel Audio Header

  26. Buzzer (BUZZ2)
      Pin1 : Buzz+
      Pin2 : Buzz-

  27. DACC1
      Open : No ACC
      Short : ACC * Auto clear CMOS when system boot improperly.

  28. LAN LED Headers
      LAN_LED2 (For LAN2 Port)

LAN_LED1 (For LAN1 Port)

29. Audio Jacks
    Blue – Line In
    Green – Line Out
    Pink – Mic In

30.  Top : RJ45 LAN Port (LAN1)
    Bottom : USB 2.0 Ports (USB2_5_6)

31. Top : RJ45 LAN Port (LAN2)
    Bottom : USB 3.2 Gen2 Ports (USB3_1_2)

32. Top : COM Port (COM2) (RS232/422/485)*
    Bottom : D-Sub Port (VGA1)
    COM Port Pin9 PWR Setting Jumpers

33. PWR_COM1 (For COM Port1)
    PWR_COM2 (For COM Port2)

34. Top : COM Port (COM1) (RS232/422/485)*
    Bottom Right : PS/2 Keyboard/Mouse Port
    (PS2_KB_MS1)
    Bottom Left: HDMI Port (HDMI1)

• This motherboard supports RS232/422/485 on COM1, 2 ports. Please refer to table below for the pin definition. In addition, COM1, 2 ports (RS232/422/485) can be  adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration. You may refer to our user manual for details.
  COM1, 2 Port Pin DefinitionPIN| RS232| RS422| RS485
  ---|---|---|---
  1| DCD, Data Carrier Detect| TX-| RTX-
  2| RXD, Receive Data| TX+| RTX+
  3| TXD, Transmit Data| RX+| N/A
  4| DTR, Data Terminal Ready| RX-| N/A
  5| GND| GND| GND
  6| DSR, Data Set Ready| N/A| N/A
  7| RTS, Request To Send| N/A| N/A
  8| CTS, Clear To Send| N/A| N/A
  9| No Power/5V/12V| N/A| N/A
  35. Top : DisplayPort (DP2)
  Bottom : DisplayPort (DP1)

Installation of ROM Socket

• Do not apply force to the actuator cover after ic inserted.
• Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.
• The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket (white arrow area).
• Make sure the white dot on the ROM is installed outwards of the socket.
• For further details of how to install ROM, please refer to ASRI website.
  Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>