iDEAL OF SWEDEN Wireless Charger for iPhone User Manual

June 9, 2024
iDEAL OF SWEDEN

iDEAL OF SWEDEN Wireless Charger for iPhone

iDEAL-OF-SWEDEN-Wireless-Charger-for-iPhone-PRODACT-
IMG

PRODUCT SPECIFICATIONS

  1. Product standard: Qi standard V1.2.4
  2. Output power: 5W/Supports up to 10W
  3. Input voltage/current: 5V/2.1A, 9V/1.67A
  4. Charging voltage/current: 5V/1A, 9V/1.1A
  5. Charging frequency: 110-205 kHz
  6. Charging distance: ≤10 mm
  7. Maximum RF output power: 33.83 dBuA/m at 3 m distance.

USER GUIDE

  1. This product must be used as advised, other wise it can cause a fire, explosion or other dangers. IDEAL OF SWEDEN has no respon sibility in case of misuse or use not compliant with the product instructions.
  2. Do not place any products other than specified smartphones on the Qi charger, as this can cause damage to your charger.
  3. Connect the Qi charger to an accessible place for easy disconnection.
  4. Connect the Qi charger to an easily accessible place for easy disconnection.
  5. This product is compatible with Qi wireless charging standard V 1.2.4

CONNECTING & CHARGING

  1. Connect the supplied cable to your wireless charger.
  2. Connect the USB end into any computer or optional wall head (must be UL or ETL).
  3. Once plugged in, you will see a white LED- light turn on, then off.
  4. Place your smartphone on the charger.
  5. The white LED-light will turn on; your phone is now being charged. If you do not see a white LED-light, please move the phone over the Qi charger until you see a steady white LED-light.
  6. Allow 4-5 hours for a complete charge.

SAFETY MODIFICATION

  1. Do not modify, disassemble, open, drop, crush, puncture or shred the Qi charger.
  2. When using the Qi charger, keep it away from flammable materials.
  3. Keep the Qi charger away from high (> 45°C 104°F) and low (< -20°C -4°F) temperature environment.
  4. Do not expose the Qi charger to rain or water.
  5. To prevent heat build-up, keep the Qi charger away from fire, heat and sunlight.
  6. Disconnect the Qi charger from the power outlet once you are done charging your device.
  7. This product is not a toy; keep it away from children.
  8. If the QI charger does not work as described or otherwise, as expected, shows any signs of interference with the product being charged or shows signs of being overheated, immediately unplug the Qi charger and remove the charging device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FFC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC STATEMENT

*This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equip- ment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
  • The content of this document is for information purposes only. IDEAL OF SWEDEN reserves the right to change this information at any time without prior notice.

IDEAL OF SWEDEN AB. All rights reserved. The product, packaging, logo and wordmark are intellectual properties of IDEAL OF SWEDEN AB. The use of the
QI-logo and wordmark is under license. Manufactured by IDEAL OF SWEDEN AB. Gamla Rådstugugatan 33, 602 24 Norrköping, Sweden Produced in China.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

iDEAL OF SWEDEN User Manuals

Related Manuals