CREATE Air Floor Box Industrial Fan User Manual

CREATE Air Floor Box Industrial Fan User Manual

Introduction

Thank you for choosing our industrial fan. Before using the appliance, and to ensure the best use, carefully read these Instructions.

The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• The appliance is only to be used indoors and for the purposes described in these instructions.

• Unauthorized use and technical modifications to the appliance can lead to danger to life and health.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Never leave any parts of the packing within the reach of children.

• This appliance has a polarized plug (one blade Is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
  DO NOT attempt to defeat this safety feature.
  WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

• Never insert objects into the grille of the fan. Do not cover the appliance during operation.

• Always disconnect the power cord from the socket before removing the protection grille

• Only connect the cable to alternating current. Observe the voltage information given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to the power cord.

• Do not use the appliance In Immediate vicinity of a bath tub, a shower or a swimming pool (observe a minimum distance of 10 ft/ 3 m). Place the appliance such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates or heaters for example). Protect power cords from oil.

• Check that the appliance is property positioned to ensure a high stability during its operation and make sure that no one can trip over the power cord.

• The appliance is not splash-proof.

• Do not store the appliance outdoors.

• Store the appliance In a dry place inaccessible to children (pack the appliance).

• If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.

• Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified electrical technician.

PARTS LIST

1. Handle
2. Fan blades
3. Protective front grille
4. Feet
5. Anti-slip pad
6. Housing
7. Control switch

OPERATING INSTRUCTIONS

CAUTION: Ensure the product is fully assembled before plugging it into a power socket.

1. Remove all parts from packing.
2. Place the fan on a flat, level and stable surface.
3. Plug into 220-240V-50Hz power socket, the appliance will be in standby mode.

SPEED SETTING:

1. Turn on the control switch and set the desired speed. (1= low speed, 2= medium speed, 3= high speed).
2. Unplug the fan when not in use.

MAINTENANCE AND STORAGE

• Unplug the unit

• To keep the fan clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
  CAUTION: DO NOT let liquid enter the fan.

• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brusher to clean the fan. This may cause damage or deterioration to the surface of the fan.

• DO NOT immerse the fan in water.

• Wait until the unit Is completely dry before use.

• Store the fan in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packing to repack the unit.

Disposal

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dal!Jerous substances in electric and electronic equipment as well as their waste disposal The symbol with the crossed dustbin shown on the package indicates that the product at the end of Its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be f!lven to waste disposal centers specially Sill In separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one tor one basis. The adequate separate collection for the subsequent start UP of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>