**Xinvouc STG6959KB Open Ear Headphones User Manual

**

How to use

Control explanation

Connect the cellphone

1. When Bluetooth is connected for the first time, in the shutdown state, long press the multi-function key to the red and blue lights to flicker ai- ternately and enter the matching state; Non-first connection, automatic connection after boot-up.
2. Open cell phone Bluetooth, search for and click the connection

Headphone charging

1. When the battery is low, the red light flashes and there is a “beep” tone
2. The red light is on when the battery is not full, and the blue light is on when the battery is full.

Function points

Press the multi-function key twice continuously to switch between

Chinese and English #In the incoming call status, press the multi-function key once to answer, and press the multi-function key twice to refuse to answer (hang up) #Press the touch key for about 25 and let go to Al intelligent voice control #Long press the + key for 1.5 seconds to switch to the next song Press and hold the key for 1.5 seconds to switch to the previous song

mode switching

1. Turn on the Bluetooth, insert the TF card, enter the TF card mode, and start the music journey. At the same time, press the volume up and down button, Bluetooth mode and TF card mode, interchange mode!

   Press ►I” to the previous song, long press to increase the volume” 14 Is the

   next song —— minus

product feature

1. Low power consumption, large capacity battery, ultra-high endurance.
2. Using Bluetooth version 5.1, compatible with mainstream brand mobile phones and tablets.
3. Low-power Bluetooth chip to ensure better Bluetooth performance.
4. The sound transmission design is more suitable for sports scenes to wear, making the ears more comfortable

Prompt

1. Before using the product, please read the instructions carefully and keep it properly
2. For the first time, please fill the product with electricity first.
3. You must charge the Bluetooth Headset if it has been not used for more than 2 mouths.
4. We must select qualified chargers from regular manufacturers
5. If your phone can’t search Bluetooth headset, please confirm whether the Bluetooth
   headset is in the pairing mode. If there is no connection for a long time, the Bluetooth earphone pairing function will be turned off.Please reopen the Bluetooth headset pairing mode; If the cell phone program is wrong. please restart the cellphone: If the Bluetooth headset program is wrong, restart the Bluetooth headset or charge restart.

Notice

1. Do not modify, repair or dismantle this Bluetooth headset, it may cause fire, electronic breakdown or even thoroughly damage the product.
2. Do not place equipment under low or high temperature (below Ode grees Celsius or above 45 degrees Celsius)
3. Please do not use it near the eyes of children or animals.
4. Please do not use this equipment in thunderstorm. Thunderstorm may cause the equipment to work abnormal and increase the risk of electric shock.
5. Do not use any diuents or valatile liquid to clean this product.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>