Livex Lighting 45662-04 45662-04 1 Light Black Small Semi-Flush Mount Instruction Manual
- June 9, 2024
- Livex Lighting
Table of Contents
Lighting 45662-04 45662-04 1 Light Black Small Semi-Flush Mount
Instruction Manual
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
41094 41095 41097 50802 41312 52902 51352 51357 49807 49808 49809 45661 45663
45422 45613 45662
- WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Thread the two mounting screws about 1/4” into the pre-drilled holes in the mounting plate spaced the same distance apart as the holes in the lamp body (A).
- Attach the mounting plate to the Junction Box with the two Junction Box Screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
- Attach the lamp body(A) into the shade(C), lock it securely with the check ring(D). NOTE: THE SHADE(C) OF THE PRODUCT MAY VARY.
- Install the light bulb(not included) in accordance with the fixture specifications. NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
- While holding the shade assembly towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise connect fixture’s ground wire directly to the mounting plate with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box.
- Raise the shade assembly onto the junction box, aligning screws on mounting plate with mounting holes in lamp body(A) and lock it securely with the ball nut (B).
Your installation is now complete. Return power to the junction box and test the fixture.
Thank
you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service
at:800-761-8056
Or visit us on-line
at:WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC.
DOC 20210841094
Documents / Resources
|
Livex Lighting 45662-04 45662-04 1 Light Black Small Semi-Flush
Mount
[pdf] Instruction Manual
45662-04 45662-04 1 Light Black Small Semi-Flush Mount, 45662-04 45662-04, 1
Light Black Small Semi-Flush Mount, Small Semi-Flush Mount, Semi-Flush Mount
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>