PROBRITE SNEB50-5K-BK Solar Nebula LED Area Light Installation Guide

Model No. SNEB50-5K-BK
SOLAR NEBULA LED
AREA LIGHT
INSTALLATION,
USAGE, & CARE GUIDE

SNEB50-5K-BK Solar Nebula LED Area Light

Visit us online anytime or call us to get information on our product range, download detailed spec & photometric files, find product and mounting accessories, view installation tutorials and videos, and learn about our DLC® rebate eligible products.

SAFETY INFORMATION

IMPORTANT
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
PRECAUTIONS

• Please read and understand this entire manual before attempting to assemble, install, or operate this light fixture.
• This light fixture requires no power source other than included solar panel.
• Make sure connections are secure using intergral plug-and-tighten cable connectors.
• This light fixture should be installed outdoors to a wall or a wooden pole.
• This solar panel should be installed outdoors with direct sunlight access; Can be mounted on ground, wall or rooftop.
•  Please read and understand this entire manual before attempting to assemble, install, or operate this light fixture.
• This light fixture requires no power source other than included solar panel.
• Make sure connections are secure using intergral plug-and-tighten cable connectors.
• This light fixture should be installed outdoors to a wall or a wooden pole.
• This solar panel should be installed outdoors with direct sunlight access; Can be mounted on ground, wall or rooftop.

WARNING: Risk of fire. Keep the fixture at least 3 in. (76mm) from combustible materials.
CAUTION: Burn hazard. Allow the light fixture to cool before touching.

PRE-INSTALLATION

PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture.
SPECIFICATIONS

battery)
Battery Capacity| 9.6V 6000mah
Charging| 8 hrs (solar panel included)
Light Color (CCT)| 5000K
Dimmable (Operated by Remote Control, Excluding mode 4/5)| 20% / 40% / 60% / 80% / 100%
Operation Modes (Operated by Remote Control)| Model: 4Hr Mode*
•400 Lumens for 4 hrs
•4000 Lumens when motion detected Mode Z All-night Mode”
•280 Lumens for 4 hrs
•80 Lumens for 8 hrs
•2600 Lumens when motion detected Mode 3: Energy Saving Mode
•240 Lumens for 4 hrs
•80 Lumens for 10 hrs
•1800 Lumens when motion detected Mode 4: Motion-only’
•4000 Lumens when motion detected Mode 5: Occupancy Mode
•First trigger: 2800 Lumens for 20 secs (2000 Lumens after 3 mins of consecutive trigger)
•Second trigger: 1800 Lumens for 30 mins
•Third trigger: 920 Lumens for 4 hrs

• Fixture will emit 4000 Lumens for 20 seconds upon each motion detected, up to a total of 3 minutes. Thereafter output will be limited to 2000 Lumens when motion is detected until the next charge.
  During All-night Mode, fixture will emit 2600 Lumens for 20 seconds upon each motion detected, up to a total of 3 minutes. There after output will be limited to 2000 Lumens when motion is detected until the next charge.
  TOOLS REQUIRED**

PACKAGE CONTENTS

HARDWARE KIT

NOTE: Hardware not shown to actual size.

WALL MOUNT INSTALLATION

1. FOR BEST RESULTS
   CAUTION: Do not tamper with motion sensor as it is wired into fixture

2. INSTALL THE MOUNTING BRACKET TO THE WALL
   ♦ Position the mounting bracket (D) with the arrow pointing up as shown in (Fig 2).
   ♦Drill 3 holes as shown in (Fig 2).
   ♦Attach bracket firmly to wall with the hex head screws (AA) and washers (BB) provided. (Fig 2).
   NOTE: Gasket (E) provided to help seal bracket to the mounting surface.

3. MOUNTING THE FIXTURE TO THE WALL
   ♦ Align the key hole slots on the mounting bracket (D) with the mounting posts on the back of the cover plate (C) as shown in (Fig 3).
   ♦  Hang the fixture by allowing the posts to slide down into the key hole slots.
   ♦  Secure light fixture to mounting bracket by tightening set screw(CC) to bottom of cover plate (Fig 4).SOLAR PANEL INSTALLATION

4. MOUNT PANEL
   Mount bracket on the solar panel (F) to appropriate platform as shown in (Fig

5. .
   NOTE: Gasket Holes pre-drilled in bracket for ease of mounting).

• To adjust the angle of the solar panel, loosen the butterfly nuts on each side of the panel.
• Once aimed, tighten the butterfly nuts to lock the solar panel position.
• Plug the connector of the solar panel wire into the connector of the fixture wire and screw outer connector as shown in (Fig 6) to lock connectors together.

OPERATION

REMOTE CONTROL OPERATION

SELECT MODE WITH REMOTE CONTROL
OPTION 1: 4 HOURS MODE (M1)
HOURS MODE enables the light fixture to turn ON for 4 hours at 400 lumens ambient light.
Upon motion detection, light emits 4000 lumens for security lighting.

• Once this mode is selected it will remain in the current mode until the fixture is manually turned off through the remote control.
• Dimming will be proportionate to the lumens (400) in the selected mode, until the fixture is manually turned off or a new mode has been selected.

NOTE: The fixture will emit 4000 lumens for 20 seconds upon each motion detected, for up to 3 minutes. Each motion detection thereafter will be limited to 2000 lumens until the next charge.

OPTION 2: ALL-NIGHT MODE (M2)
ALL-NIGHT MODE enables the light fixture to turn on for first 4 hours at 400 lumens, followed by 8 hours at 80 lumens for lighting through out the night Upon motion detection, light emits 2600 lumens.

• Once this mode is selected, it will remain in the current mode until the fixture is manually turned off through the remote control.
• Dimming will be proportionate to the lumens (400, 80) in the selected mode, until the fixture is manually turned off or a new mode has been selected.

NOTE: The fixture will emit 4000 lumens for 20 seconds upon each motion detected, for up to 3 minutes. Each motion detection thereafter will be limited to 2000 lumens until the next charge.
OPTION 3: ENERGY-SAVING MODE (M3)
ENERGY-SAVING MODE enables the light fixture to turn on for first 4 hours at 240 lumens, followed by 10 hours  at 80 lumens to conserve the battery. Upon motion detection, light emits 1800 lumens.

• Once this mode is selected, it will remain in the current mode until the fixture is manually turned off through the remote control.
• Dimming will be proportionate to the lumens (240, 80) in the selected mode, until the fixture is manually turned off or a new mode has been selected.

OPTION 4: MOTION-ONLY MODE (M4)
MOTION-ONLY MODE enables the light fixture to turn on ONLY when motion is detected. Upon motion detection, light emits 4000 lumens for maximum security lighting.

• Once this mode is selected, it will remain in the current mode until the fixture is manually turned off through the remote control.
• Dimming is unavailable in this mode.

OPTION 5: OCCUPANCY MODE (M5)
OCCUPANCY MODE enables the light fixture to turn on ONLY when motion is detected:

•  1st trigger: 2800 lumens for 20 seconds (2000 lumens after 3 minutes of consecutive trigger)
• 2nd trigger: 1800 lumens for 30 minutes
• 3rd trigger: 920 lumens for 4 hours
• Once this mode is selected, it will remain in the current mode until the fixture is manually turned off through the remote control.
• Dimming is unavailable in this mode.

MANUAL OPERATION ON-FIXTURE CONTROLS:

• Power – depress button on left of motion sensor for ON/OFF operation.
• Depress button on right of motion sensor for Mode. Continuepressing button until desired Mode is achieved.

CARE AND CLEANING

• Clean the solar panel with clear water and a soft damp cloth on a regular basis to ensure batteries can fully charge.
• To prolong the original appearance of the light fixture clean with clear water and a soft, damp cloth only.
• Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty.
• Do not spray the light fixture with a hose or power washer.

TROUBLE SHOOTING

motion sensor. If red, the battery needs to be charged for 8 hours before use.
Check that cable connection is secure. Ensure the solar panel has exposure to sunlight and that there is no debris covering the solar panel.
No motion detected| Check if the motion sensor is blocked by obstacle or dirt.
Remote control unresponsive| Low battery on the remote| Replace the battery cell (3V Lithium CRV2032) on the remote.
Angle and distance| Turn the light OFF and ON under different angles and distances.
Light not bright enough| Wrong mode selected| Turn the light OFF and ON again to select a mode with higher output.
Light cycles ON and OFF continuously| Motion sensor is faulty| Clean the motion sensor with a damp, clean cloth. If the problem persists, please contact customer service.

LIMITED WARRANTY

This is a limited warranty offered by Probrite for one year from the date of purchase to its customers. Probrite warrants to customers that the product will be free from defects in material and workmanship. The obligation of Probrite under this warranty is limited to the provision of replacement of product and is extended to the original purchaser of the product on presenting valid purchase receipt or other proof of date of original purchase acceptable to Probrite. The receipt is required for rendering the warranty performance. Any warranty claims without original proof of purchase would not be accepted. lt should be noted that the warranty does not apply to Probrite products that have been altered or repaired by unauthorized personnel, have been subjected to neglect, abuse, misuse or accident or damages caused during shipping. Any other products not manufactured by Probrite which have been supplied, installedand/or used in conjunction withProbrite products are not covered under this warranty.
Any damages caused by replacements bulbs, LEDs or  corrosion ordiscoloration of brass components are also not covered by this warranty.
LIMITATION OF LIABILITY:
In no event Probrite shall be liable for indirect, consequential, incidental or special damages, or lost profits. Probrite is not liable for any claims or damage arising out of or connected with the manufacture, sale, delivery, use, maintenance and repair or modification of Probrite products, or supply of any replacement parts that exceed the purchase price of Probrite products, giving rise to a claim. Labor charges to remove or install the fixtures will not be accepted.
TO CLAIM:
Please contact PROBRITE customer service at 1-844-507-5651 or email support@PROBRITE.com and include your name, address and contact number, along with a copy of the purchase receipt and a brief description of the problem.

Questions? / Problems? / Missing Parts? / Need Accessories?
Before returing to the store, call or email PROBRITE
Customer Service 9am-5pm EST Monday to Friday.
1-844-507-5651
support@PROBRITE.com
PROBRITE.COM
RETAIN THIS MANUAL FOR FUTURE USE
Para las translaciones en español,
visit www.probrite.com/install

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>