RAIN BIRD Pro Build 4.6 Cirrus User Manual
- June 13, 2024
- RAIN BIRD
Table of Contents
RAIN BIRD Pro Build 4.6 Cirrus
Specifications
- Product Name: CirrusPROTM
- Build Version: 4.6
- Compatibility: Rain Bird Decoder systems
- Decoder Diagnostics : Limited features available
- Historical Weather Data : Available
- Program Management: Enhanced features for program creation and control
- Single Row Spacing: Added for precipitation rate calculations
Product Usage Instructions
Decoder Systems Compatibility
To ensure compatibility with Rain Bird Decoder systems, follow these steps:
- Enter the proper value in the maximum number of simultaneous solenoids based on your interface.
- For Decoder Diagnostics, use the On/Off test and Fault Finding Mode in the Diagnostics section.
Historical Weather Data
To access historical weather data:
- Go to the Reports menu and select Weather.
- Customize the data by selecting a date range, Hourly/Daily values, weather source, and columns to display.
- Use zoom functionality to view specific data points.
Program Management
To manage programs
- Select the Programs icon to display the list of programs.
- Expand programs to see schedules and highlight stations on the map.
- Create programs using Sub-Areas for fine-tuning.
Single Row Spacing
For precipitation rate calculations:
- Select Single-Row spacing configuration at Station definition or in Sub-Area settings.
Notes Feature
To add notes:
- Use the Description feature to add notes from various sections within CirrusPRO.
FAQ
- Q: Can CirrusPRO control all field hardware types sold by Rain Bird?
- A: Yes, CirrusPRO is compatible with all field hardware types currently sold by Rain Bird.
- Q: What are the limitations of the Decoder diagnostics in CirrusPRO?
- A : The current limitations include only the On/Off test and Fault Finding Mode.
Features
CirrusPRO™ New Features Guide for build 4.6
Decoder Systems Compatibility
Build 4.6 is compatible with Rain Bird Decoder systems, which means that
CirrusPRO can now control every field hardware types currently sold by Rain
Bird.
Note that we are still working on adding some legacy Decoder features in
CirrusPRO as some of these features are not yet available, such as the “Pump
Source” or the “Current Graph” features. These will be available in a later
build.
Decoder Diagnostics
Limited Decoder Diagnostics is currently available. Only the “On/Off” test as well as the “Fault Finding Mode” (also known as the 50/60Hz mode) are available in the “Diagnostics” section of CirrusPRO.
- To run the “On/Off” test, go to “Decoder Station Diagnostics” and select which Decoders to be tested by filtering by hole(s) and area(s) and select “Run Test”.
Results are displayed in a table showing the different current values at each
step (Resting, In-Rush and Holding).
WatchDog™ Weather Station compatibility
CirrusPRO is now compatible with WatchDog weather station as a weather source.
- To set a WatchDog weather station, go to System Settings and Weather. Click the “+” sign, enter a name and select “WatchDog” as your weather source type. Enter your API Key and your serial number (those are supplied by Rain Bird upon purchase of your WatchDog weather station). Set Elevation and retrieval time and click “Save”.
Historical Weather Data
CirrusPRO now offers you historical weather data from any of your weather sources. To access this data, go to your “Reports” menu and select “Weather”. To customize the data displayed:
Programs now available in the Map Menu
- You can now view your programs from the map by clicking on the Map Menu.
Program
creation using Sub-Areas: 
Ability to see “Unassigned Stations” in Flo-Manager®:
It is now possible to see which stations have not been yet assigned to a flood
zone simply by going to Flo-Manager in System Settings.
Single
Row Spacing added to Spacing selection:
Single-row is now an available spacing configuration for precipitation rate
calculations. This is available at the “Station” definition or in the “Sub-
Area” when configuring the default values.
Notes
Users can now add Notes from many places within CirrusPRO. What was previously known as “Notes” in the “Station” table has been renamed “Description” to avoid confusion with this new feature.
Creating Notes directly from the Map:
You can now add Notes anywhere on the Map. As an example, a tree fell down
near Green #2 and you want to alert one of your colleagues. From the Map, from
your mobile device, long press on the map where the tree fell and select “Add
Note” (if on a PC, right-click to add a Note).
A small pop-up will appear for you to type your note. From a mobile device,
you can use the built-in “voice-to-text” to dictate your note. Once your text
is complete, you can use the “@” to assign this Note to a colleague. This will
prompt a lost of users to appear for you to select. You can finish typing the
name or select from the list.
Click the “+” sign to add this Note to CirrusPRO. Allison will receive a
notification from CirrusPRO. When she taps on the notification bell, she will
see that there is an unread Note for her
When tapping that notification, it will take Allison to the Note that was
assigned to her. 
Creating Notes for Stations
If you long press (or right-click) on a station from the map, you can also add Notes to stations by selecting the “Notes” icon in the lower-left corner of the station pop-up. These Notes also show up in the “Stations” screen attached to the corresponding station.
The Note can also be created directly from the “Stations” screen and the icon will appear on the Map once created.
Creating Notes elsewhere in CirrusPRO
Notes can be created in other areas of CirrusPRO, such as from the “Activity/Completed” screen when in a Course view. You can tap or click on any of the cells and you will have an option to show/create one.
CONTACT
- Rain Bird Corporation 10
- Golf Division
- 6991 E. Southpoint Road, Tucson, AZ 85756 Phone
- 520-741-6100
- Fax 520-741-6146
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>