WOODBRIDGE Air Bathtub User Manual
- June 4, 2024
- WOODBRIDGE
Table of Contents
WOODBRIDGE Air Bathtub User Manual
This products must be installed by a fully insured and licensed plumber only.
Installation of any our product by anyone other
than fully insured and licensed plumber shall void limited warranty. We
recommends that such licensed plumber has experience in the installation of
products.
Limited warranty is void on any commercial installation
We are not responsible for local code compliance for this product. Building
and plumbing codes may vary from state-to-state in
accordance to your location. We are not responsible for providing any
compliance certifications.
Under no circumstances we shall not be liable for any incidental damages
sustained in connection with this product Neither manufacture, nor
distributor, nor retailer is responsible for water damage or flood caused due
to use of this product. Under no circumstances We shall not be liable for any
and all fees, cost of installation/reinstallation/removal, subsequent damage
or transportation in case of the product defect.
Customer Service Phone: 562-229-0088. (Monday – Friday 9 AM – 5 PM Pacific Time) Or Email: help@woodbridgebath.com
BEFORE YOU BEGIN
- Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.
- All information is based on the latest product information available at the time of publication. WOODBRIDGE® reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
PRODUCT REQUIREMENTS
A. Summary Of Key Requirements
Observe all local plumbing codes, Install the unit to a level subfloor,
Provide properly -dimensioned framing.
B. Product Inspection
Uncarted and inspect bath for damage. Leave all materials in the crate during
construction to prevent damage.
ROUGHING IN
IMPORTANT INFORMATION
- Measurements are± 1/2″ and subject to change without notice
- Please note that installer(s) must be certified or warranty will be voided.
- • Specifications & Configurations are subject to change without notice
- Measurements herein supersede all others published prior to publication date shown below
- Please measure tub on-site before installation
- Before ordering or installing, please consider future access to equipment
INSTALLATION REQUIREMENTS
A. Tools Required
- Adjustable pipe
- wrench
- Ruler
- Level
- Safety shoes
- Safety glasses
- Square
- Screwdriver
- Pliers
- Utility knife
B. Materials Required:
- Plumbers putty
- Wall coverings, as necessary
- Silicone sealant
- Gypsum cement (optional)
- Construction adhesive (optional)
- Protective covering for bathtub
- Nails
C. Clearance Requirements:
Check the rough-in and room dimensions to provide adequate space for the bath
unit.
SITE REQUIREMENTS
A. Plumbing Preparation
Position the plumbing according to rough-in dimensions.
Cap the supplies and check for leaks.
BEFORE INSTALLING UNIT
CAUTION: Ensure a watertight seal on the bath drain connections.
A. Install the faucet valving and shower head tee. When drilling bathtub for
faucet, ensure sufficient clearance. Open the hot and cold water valves and
check the supply connections for leaks.
B. Run water into the bath and check the drain connections for leaks.
C. Fill the bathtub up to the overflow level and check overflow unit for
leaks.
INSTALL BATHTUB
This products must be installed by a fully insured and licensed plumber only.
-
Your new bathtub has been manufactured to the highest possible standards, it has been tested and approved by factory
-
When removing bathtub from protective carton. DO NOT LIFT BATHTUB BY PIPE WORK. Inspect for any possible damage that may have occurred in transit. IMPORTANT: Bathtub must be installed level on all top edges.
-
Set the bathtub on two 4×4 pieces of lumber .so you can access from the bottom of the bathtub.
-
Connect Power Supply:
Connect power supply to control unit. The electrical connections must comply with local authority regulations and must be done by an authorized electrician. -
Fill bathtub with water to approximately 40 mm(1.6″) above the jets and trial run pump for 10-15 minutes. Check all the fittings for leaks and test the control functions. Switch off the spa pump and leave the unit filled with water (pump is not running) for at least another two minutes. Check the pump and pipes union connections for leaks. Hand tighten union connections if required.
IMPORTANT: Your bathtub has been factory tested and approved. It is the responsibility of the installer to test run the bathtub, check all the fittings for leaks and test the control functions. NON OBSERVANCE WILL INVALIDATE FACTORY WARRANTY. -
The unit must be connected only to a supply circuit that is protected by a Ground-Fault Circuit Interrupter (GFCI). Such a GFCI should be provided by the installer and should be tested on a routine basis.
INSTALLATION – SITE PREPARATION
- Provide sufficient floor support. Check the floor at the installation site and make repairs as needed.
- Waterproof the floor is highly recommended. Finished floor must be level.
- Provide adequate clearance on all sides of the bathtub.
- Minimum of 2 inch waste drain pipe is required.
Carefully, remove the tub from it’s crate/box.
Important Note: Bathtub must be carried by a minimum of 2 adult people in
upside down position only. Do not carry the bathtub by its panel.
To avoid scratches or damages to the bathtub be sure to set it on cardboard with soft blanket on top of the cardboard.
Set your bathtub on two 4×4 pieces of lumber so you can have access from the bottom of the bathtub. Put a tray beneath the bathtub.
Very Important! Before proceeding with installation, please check that push pop-up, drain, and integrated overflow are properly sealed and tightened.
Push the pop-up into a close position and fill the bathtub with cold water above the overflow level to test for overflow leakage and drain leakage.
Check for any leaks around the drain and pipe. (NOTE: Due to surface tension, it is normal for a small amount of water to pool around the drain)
If a leakage occurs please disassemble the drain line or overflow assemblies and you can apply a plumbing putty/silicone caulk to fix the leakage.
Once the leakage test was performed you may proceed to the installation.
Make sure the floor is level and even at installation area. Adjust leveling legs flush with bottom skirt of bathtub. Set bathtub in the desired location and check for level and for proper contact. Adjust legs as needed.
OPERATING GUIDE
POWER THE BATHTUB
To turn on the system, press the power button, and the indicator
light will come on. Then press either the “Light” Button or “Air pump” button
to turn on the desired Function, press again to turn off the function. (While
the functions are active, the button will have a red back light, when powered
off it will have a white back light).
If no button is pressed for 10 seconds the control buttons will lock, and the
“Power” button will begin to flash. To unlock, press and hold the power button
for 2 seconds, until the button stops flashing. You can now activate the other
buttons as desired.
Please note, the system will automatically power itself off after 60 minutes.
Press the “Power” button. If system is locked press and hold the “Power” button for 2 seconds, then press the power button again to turn off the system.
AIR BUBBLE MASSAGE SYSTEM
The Air pump should be used when the tub is filled. The Air pump will power
off after 5 minutes if there is no water in the tub.
CHROMA-LIGHT
When powered on the light will cycle through all available colors.
NOTES
INSTALLER INFORMATION
DATE OF INSTALL: ____
INSTALLER’S NAME: ____
PLUMBER: ____
CONTRACTOR: ____
LICENSE#: ____
WARRANTY
Woodbridge warrants its products as listed in below to be free of material and workmanship defect, subjected to the limitations set forth in this limited warranty.
- Bathtub, Whirlpool/Air Bubble Massage Tub: 1 Year limited to be free of defects in material and workmanship
- Toilet and Bidet: 1 Year limited to be free of defects in material and workmanship
- Faucet: 1 Year limited to be free of defects in material and workmanship
- Vanity: 1 Year limited to be free of defects in material and workmanship
- Granite, Marble, Engineered Quartz Vanity Top: 1 Year limited to be free of defects in material and workmanship
- Medicine Cabinet, LED Mirror: 1 Year limited to be free of defects in material and workmanship
- Stainless Steel Sink: 1 Year limited to be free of defects in material and workmanship
- Solid Surface Shower Wall Panel, Shower Base and Vanity Top: 10 Years limited warranty to be free from material defects
- Shower Door: Life me warranty on glass components and 1Year limited on other hardware
This limited warranty is non-transferable and only applies to products
purchased and installed in the United States.
This limited warranty excludes all industrial, commercial and business usage.
Proof of purchase (original sales receipt) from the original purchaser,
Description and pictures of defect, model number or model description must be
provided to Woodbridge Bath for all warranty claims and Woodbridge Bath IS NOT
responsible for labor cost, removal or installation costs.
This limited warranty shall not apply to goods which have been subject to accident, negligence, improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty.
This limited warranty surface damaged caused by use of chemicals that break through or dissolve the surface finish or damage caused by the accidental dropping of sharp or heavy objects. Improper care and use of abrasive cleaners and will void the warranty.
During this limited warranty period if a malfunction occurs and artier inspection it is determined that a defect developed during normal use, Woodbridge will as at its election proceed within any of the following options:
(1) repair or replace the deface part(s) or product(s) at cost
(2) issue a refund of the original purchase price of the product(s) (Valid
within 30 days from the date of purchase)
(3) issue a credit to be applied toward the purchase of a new product.
Shipping/delivery charges may apply and are in sole discretion.
Caution:
NEVER use cleaners containing abrasive cleaners, ammonia, bleach, acids,
waxes, alcohol, solvents or other products that are not recommend for Chrome
finish will void the warranty.
Woodbridge products should be installed by a fully insured and licensed
contractor only. Installation by anyone other than fully insured and licensed
contractor will void this limited warranty.
RESPONSIBILITIES OF OTHERS
Inspecting the unit prior to installation is the responsibility of the
installer or building contractor who acts on behalf of the user. They are
responsible for ensuring the unit is free of defect or damage. Notices are
placed on the unit and on the shipping carton advising the installer of this
responsibility. In the event of a problem, the unit must not be installed.
Woodbridge is not responsible for failures or damage that could have been
discovered, repaired, or avoided by proper inspection and testing prior to
installation.
Damage occurring in transit is the responsibility of the carrier. The user or
installer MUST open the crate and inspect the unit for damage when it is
delivered. If damage is discovered, it must be reported immediately to the
seller and the carrier in writing, and an inspection requested. Failure of the
carrier to respond
should be reported to the seller and the carrier. Your freight claims should
be filed promptly therearier.
This limited warranty does not cover any liability for consequent al or incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including those of merchantability or fitness for an intended purpose.
Disclaimer
Except as expressly provided, there shall be no warranty or obligation,
express or implied, oral or statutory. No dealer or other person has the
authority to make any warranties or representations concerning or its
products. In no event shall be held responsible for any such warranties or
representations.
Some states/provinces do not allow limitations on how long an implied warranty lasts, or the exclusion on limitation of special, incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, you may also have other rights which vary from state/province to state/province.
To obtain warranty and replacement parts, please send e-mail to help@woodbridgebath.com with the original receipt information, Woodbridge will determine whether to repair or replace your product, issue a refund or issue a credit.
WOODBRIDGE
17300 Marquardt Ave.
Cerritos, CA90703 USA
(Monday – Friday 9 AM – 5 PM Pacific Standard Time)
Email: help@woodbridgebath.com (Prefer by
e-mail)
Customer Service Phone: 562-229-0088
www.woodbridgebath.com
IMPORTANT SAFETY RULES
ATTENTION! ALWAYS FOLLOW THESE PRECAUTIONS WHEN USING A BATHTUB
⚠ Warning The bathtub must be installed and used as described in this manual
⚠ Warning Use caution when entering or exiting the bathtub
⚠ Warning Do not permit children or persons with infirmities to use the
bathtub without supervision of an adult
⚠ Warning People using any medications or having adverse medical history must
consult a physician prior to use of the bathtub to avoid potential
hyperthermia and possible drowning
⚠Warning Water temperature over 100°F may cause hyperthermia and/or other
health problems. Check water temperature and adjust it for your personal
comfort
⚠ Warning Never use bathtub while intoxicated, after taking meals or any
alcoholic beverages. Consuming alcoholic beverages before or during bathing
will cause drowsiness and may result in hyperthermia, loss of consciousness,
or even drowning
⚠ Warning If you are pregnant or you feel that you are may be pregnant,
consult your doctor before using the bathtub
⚠ Warning Never use any electrical devices such as hair dryer, lamp,
telephone, tv, radio, or others within 5 feet of the bathtub
⚠ Warning Do not overfill the bathtub before entering. Entering the bathtub
when filled will cause overflow and slippery conditions. Use extreme caution
when entering and exiting
Care and Cleaning
- Most dirt will wash off with mild soap and warm water.
- For tough spots, use liquid dish washing soap or non-chlorine bleach.
- Do not use abrasive material such steel wool or scouring pads to clean the acrylic surface.
- Always test the cleaning solution on a small area before using it on the entire surface.
- Do not allow cleaning to soak on the acrylic surface.
- Rinse thoroughly with water immediately and wipe dry with soft cloth.
Repair and Maintenance
- Use liquid polish compound such as Gel-Gloss Kitchen and Bath Polish(TM) to keep the original shine of acrylic surface.
- Light scratches can be removed with polishing compound for automobiles.
- For deeper scratches use wet sandpaper (1500 grit or higher). Always add water when sanding and lightly sand the area larger than the scratch in a circular motion to remove the scratches. Repeat until the scratch is removed. Use soft cloth and small amount of polishing compound to restore shine. Repeat as needed until surface shine is restored.
IMPORTANT!
DO NOT USE: Abrasive cleaners such as: acid, ammonia, bleach, and similar
solutions. Use of such solutions may cause
corrosion, finish peeling, and/or dull the surface.
DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired
brushes that will permanently scratch the surface.
Retain these installation instructions for future reference!
Thank you for using WoodBridge products!
Please don’t hesitate to contact us if you have any questions or concerns.
Customer Service Phone: 562-229-0088.
(Monday- Friday 9 AM – 5 PM Pacific Time)
Or Email: help@woodbridgebath.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>