iReliev ET-1313 Muscle and Joint Pain Relief Owner’s Manual
- June 16, 2024
- iReliev
Table of Contents
Quick Start Guide
ET-1313 Muscle and Joint Pain Relief
IMPORTANT: COMPLETE ALL STEPS BELOW TO ENSURE INTENSITY LEVEL RESET TO “0” DOES NOT INITIATE.
Step 1. Insert 3 AAA Batteries being careful to match up the symbols. (+-)
Step 2. Connect lead wire cables to respective channel. Step 3. Connect lead
wire pins to 2 small pads per channel before applying to skin.
Remove Pads from film. Step 4. Apply Pads: 2 small pads per channel as per
placement diagram in manual. Step 5. Power On:Press ON/+.
Step 6. Treatment Time: Press Mode, then ON/+ or OFF/- to select. Step 7. Set Therapy Mode: Press Mode. Press ON/+ or OFF/- to select. Step 9. Set Intensity: Press CH1 or CH2. Press ON/+ or OFF/- to select.
Safety Feature
Intensity Level Reset See steps #2-9 to complete set-up.
**** WARNINGS & PRECAUTIONS
DO NOT USE THIS SYSTEM IF YOU HAVE A CARDIAC PACEMAKER, IMPLANT DEFIBRILLATOR
ON ANY OTHER IMPLANTED METALLIC OR ELEC- TRONIC DEVICE. DO NOT USE THIS DEVICE
FOR UNDIAGNOSED PAIN SYMPTOMS UNTIL CON- SULTING A PHYSICIAN. DO NOT USE IF
PREGNANT OR IN LABOR. NOT SUITABLE FOR CHILDREN UNDER 16 YEARS OLD. PLEASE
REFER TO MANUAL FOR ADDITIONAL WARNING AND PRECAUTIONS.
IMPORTANT: STEPS 1 THRU 4 SHOULD BE PERFORMED WITH THE DEVICE TURNED OFF.
ONCE DEVICE IS TURNED ON, DO NOT REMOVE ELECTRODES WITHOUT TURNING OFF THE
UNIT. ,
*This guide is not intended to replace or substitute the ET-1313 manual.
**Please read the instruction manual completely before using this device.
For more information, warranty registration and promotions visit us online at
www.iReliev.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>