vivo V2203 Smartphone User Guide
- June 9, 2024
- Vivo
Table of Contents
vivo V2203 Smartphone User Guide
Welcome To Vivo
Please read this Quick Start Guide before using your phone, and keep it for
future reference.
This Quick Start Guide tells you how to set up your phone and use its key
features. For more detailed instructions, turn on your phone, then go to
Settings > About phone > Customer service > Manual.
You can also learn more useful information on vivo’s o9icial website.
For legal information, go to Settings > About phone > Legal information.
For the FCC ID of this phone, please go to Settings > About phone > Status.
The features and images shown in this guide are for reference only. They may
differ from the actual product.
It is recommended that the device be charged for at least 30 minutes before
turning it on for the first time.
Optimum operating temperature is 0”C to 35°C and optimum storage temperature
is -20”C to 45°C.
Extreme heat or cold may damage your device or accessories.
The device IMEI can be obtained by dialing *#06#.
Tip:
Insert/remove your SIM card using the provided eject tool.
To avoid damaging the device, do NOT remove the back cover.
This phone supports standard Nano SIM / micro SD cards.
If necessary, please go to your local operator shop for a standard Nano SIM
card.
FCC statement
This device complies with part 15 of the FCC Rules .Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired
Caution: Changes or modifications not expressly approved by vivo Mobile
Communication Co., Ltd. could void the user’s authority to operate the device.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
FCC SAR
- Head: 0.97 W/kg
- Body wom: 0.93 W/kg (15mm distance)
- Hotspot: 0.84 W/kg (10mm distance)
Product Standard Accessories
- Cell phone x1
- Eject tool x1
- Charger x1
- Warranty card x1
- USB cable x1
- Quick start guide x1
SAR statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6 W/kg.
For body-wom operation, this device has been tested and meets the FCC RF
exposure guidelines for use with accessories that contain no metal, with the
device positioned at least 15 mm away from the body.
RF exposure compliance with any body-worn accessories that contain metal has
not been tested and certified, and use of such body-wom accessories should be
avoided.
Accessories available commercially must be used with a distance of at least 15
mm between the device and the user’s body for body-worn operation.