PROJECT SOURCE HRK0991A-BN Brushed Nickel Farmhouse Bell Pendant Light Instruction Manual

PROJECT SOURCE HRK0991A-BN Brushed Nickel Farmhouse Bell Pendant Light

Project Source and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

TROUBLESHOOTING

|
---|---
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
Bulb will not light.

| 1.  Bulb is burned out.|

1. Replace light bulb.
2. Check wiring.

|
CARE AND MAINTENANCE|

• Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.

WARRANTY

• The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.

|

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20-30 minutes.

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit lowes.com for more information.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Use flashlight or alternate light source to light work area during installation.
• Assistance may be required to support fixture during installation.

CAUTION

• Connect fixture to supply wires rated for at least 167˚F.
• Workable for dimming circuits when using appropriate light bulbs with dimmable function.

PACKAGE CONTENTS

HARDWARE CONTENTS

Note: Hardware shown actual size.

INSTALLATION OVERVIEW

Turn off the power and remove existing fixture.

1. Unscrew the nut (C) from threaded tube (B). Separate the mounting strip (A) from Canopy (D).

2. Attach A to outlet box using AA. Temporarily place D through B determine amount of adjustment necessary B.

3. Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.

4. Attach wire connectors (BB). Tape wire connectors (BB) and wires together with electrical tape (not included).

5. Place canopy (D) onto threaded tube (B) and secure with Nut (C). Place canopy (D) onto threaded tube (B) and secure with body (E).

6. Attach metal shade (F) to the fixture body (E). Secure with socket ring (G).
   Install light bulb (not included). Use 150-watt max. medium-base bulb or 23-watt max. standard-base CFL or equivalent LED bulb.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>