ANOLiS ArcSource Submersible II Multi Color Light User Manual

ANOLiS ArcSource Submersible II Multi Color Light

Introduction

The Arc Source Submersible II has a housing crafted from the highest quality marine grade bronze meaning its is capable to withstand the very harshest environmental conditions. The Arc Source Submersible II can easily operate constantly submersed up to 10 m and offers more than 10 different beam options for positioning freedom.

Safety information

The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
The persons who are in charge of installation should have the required qualifications for this type of work

Avoid using the unit in locations subject to possible impacts

The unit is intended only for permanent underwater installation up to depth of 10 m.

The relevant provisions of UL 676 Underwater Luminaires and Submersible Junction Boxes must be observed for installation.

Do not let the unit in frozen water.

All service works have to be done in a dry environment (e.g. in a workshop).

Avoid looking directly into the LED light beam at close range.

Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.

The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given by this standard (e.g. transmitters in surrounding area) before installing the equipment. Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements according to class B

Mounting

The Arc Source Submersible II can be arranged in any position orientation. The LED module body is mounted on a bronze bracket for tilt adjustment . Use the Allen key no.6 to adjust desired tilt position of the LED module by means of two tilt locks (1). For fastening the Arc Source Submersible II to the flat surface use either three holes or two semicircle slots which allows fine adjusting the fixture in a pan direction.

Wiring of the ArcSource Submersible II:

Arc Source Submersible II connection with a control unit

Maximum cable length between the Arc Source Submersible II and the Sub Drive 1 (Sub drive 4) depends on the operating mode:
Minimum mode: 100 m
Medium mode: 50 m
Maximum mode: 25 m

Example of connection:

Technical specifications

ELECTRICAL

Input voltage : 24 V DC
Typical Power Consumption: 35 W (@ 350 mA), 70 W (@ 700 mA), 100 W (@ 1000 mA)
Max. Input Current: 1000 mA (max. per channel)

OPTICAL

Light Source: 6 x 15 W Multichip LED
Colour Variants: RGBW (W – 6500 K), RGBA, PW (W – 3000 K)
Beam Angle:
Symmetrical: 7°, 13°, 20°, 30°, 40°, 60°, 90°
Bi-symmetrical: 7° x 30°, 30° x 7°, 7° x 60°, 60° x 7°, 35° x 70°, 70° x 35°, 10° x 90°, 90° x 10°
Projected Lumen Maintenance: 60.000 hrs (L70 @ 25 °C / 77 °F)

CONTROL

Compatible drivers: Sub Drive 1, Sub Drive 4

PHYSICAL

Weight: 9.5 kg / 20.9 lbs
Housing: Marine Bronze, Tempered Glass
Connection: Cable Submersible PBS-USE 3×1.5 mm2 (CE), Cable Submersible L0390 (US)
Mounting Method: Yoke, Floor Stand (optional)
Adjustability: +35°/ -90°
Protection factor: IP68 10m rating (CE), maximum depth of 10 m (US)
IK Rating: IK10
Cooling System: Convection
Operating Ambient Temperature: +1 °C / +45 °C (34 °F / +113 °F )
Operating Temperature: +55 °C @ Ambient +45 °C (+131 °F @ Ambient +113 °F )

OPTIONAL ACCESSORIES

Sub Drive 1
Sub Drive 4
Floor Stand Arc Source 24 MC Submersible 5mm (P/N10980315)

INCLUDED ITEMS
Arc Source Submersible II
User manual

DIMENSIONS

Cleaning and maintenance

Disconnect from the mains before starting any maintenance work

Maintenance and service operations are only to be carried out by a qualified person. Should you need any spare parts, please use genuine parts.

August 27, 2021
Copyright © 2021 Robe Lighting – All rights reserved
All Specifications subject to change without notice
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>