allen roth 46303PHXLG 6 Inch Wall Hook Instruction Manual
- June 8, 2024
- Allen+Roth
Table of Contents
allen roth 46303PHXLG 6 Inch Wall Hook Instruction Manual
Thank you for purchasing this allen + roth brand product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page. If the item is no longer for
sale, or if you have any questions or problems, please call our customer
service department at 866-439-9800, 8
a.m. – 8 p.m.,
EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Rail not level. | Original measurements are inaccurate | Re-install starting |
with level marks
CARE AND MAINTENANCE
On an annual basis, it is recommended to double check all connections and re- tighten all screws and anchors. Clean with a lightly damp cloth or towel using water only to protect the durability of the finish on hooks and the rail.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- The maximum load for this decorative rail, regardless of mounting application, is 35 lbs.
When drilling into the wall, avoid any electrical wiring or plumbing that may be located behind the wall. Damaged electrical wiring can cause electrical shock and/or fire.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package contents list diagram above. If any part is missing or damaged, do not attempt to install the product.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (not included): Drill with 3/32 in. and 5/16 in. drill bits, Phillips screwdriver
Helpful Tools (not included): Level, Pencil
TOOLS REQUIRED
FEELING CONFIDENT START YOUR NEXT PROJECT
- Visit Lowes.com for more information
PACKAGE CONTENTS
Rail
Riel
x 1
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Temporarily place rail (A) in desired location and mark mounting hole locations.
-
a. For solid wood/wood stud installations, remove rail (A) and drill 3/32 in. pilot holes at marks.
2b. For drywall installations, remove rail (A) and drill 5/16 in. pilot holes at marks. Place anchors (BB) into holes.
2c. For all other installation types, note different hardware (not included) might be needed. Follow manufacturer’s instructions.
-
Using a screwdriver secure screws (AA) in pilot holes and ensure about 0.14 inch of screw head projects from the wall to catch hang slots on back of rail.
-
Place rail on top of screws to hang securely.
Note: Tighten or loosen screw from wall to adjust as needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>