ABYSM GAMING AB123011 DANUBE Computer Case User Manual

June 12, 2024
ABYSM GAMING

ABYSM GAMING AB123011 DANUBE Computer Case User Manual
ABYSM Logo

PRODUCT FEATURES

  • 230 mm ultra-wide rack and ultra-strong compatibility
  • Standard TYPE-C interface, which ensures quick transmission speed
  • 3 mm tempered glass door, which is both convenient and safe.
  • 280 mm water cooling design at the top; reasonable heat dissipation system.
  • Support 20 cm fan, with strong heat dissipation effect and colorful lights,

PRODUCT FEATURES
Dimension Dimension

Product design and specifications may be revised to improve qualty and performance without notice.

CASE STRUTURE

Glass side plate

  1. Glass side plate
  2. Main rack
  3. Top dustproof mesh
  4. Hardware side plate
  5. Panel components
  6. Hard disk rack
  7. Bottom dustproof mesh ®
  8. Side plate screws

ACCESSORIES

  • Copper column x2

  • Power supply screw X6

  • Hard disk screw x6

  • Mainboard screw x12

ASSEMBLY & DISASSEMBLY STEP

  • Remove the screws to dismantle the glass side plate
  • Remove the screws to dismantle the Rardware side plate; removal panel

ASSEMBLY & DISASSEMBLY STEP @

INSTALL MAINBORAD

  • Mount copper columns based on mainboard hole mainboard into crate mounting site and fix it with screw

Mount copper

INSTALL HDD

Unscrew the screw to dismantle hard disk bracket and mount HDD; put back the hard disk bracket to rack and tighten it with screw.

Unscrew the screw to dismantle

INSTALL SSD

  1. Unscrew the screw to dismantle SSD bracket and mount SSD; put back the SSD bracket to rack and tighten it with screw;
  2. Unscrew the screw to dismantle hard disk bracket and mount SSD; put back the hard disk bracket to rack and tighten it with screw;
  3. Put SSD into rack mounting position and tighten it with screw,

INSTALL SSD

INSTALL POWER SUPPLY

Put the power supply at the crate installation position and fix it with 4 power supply screws,
power supply screws,

INSTALL DISPLAY CARD

Unscrew the screw to lift the baffle plate, set display card into crate installation site, tighten it with screw and then assemble and lock the baffle plate.
assemble and lock

INSTALL CASE FAN

Installation configuration of fan and water cooling of the case:

Front:
120mm fan x 2; 140mm fan x 2; 200mm fan x1
240mm cold exhaust fan x 1; 280mm cold exhaust fan x 1 Top:
120mm fan x 2; 140mm fan x 2
240mm cold exhaust fan x 1; 280mm cold exhaust fan x 1
Rear:
120mm fan x 1; 140mm fan x 1
Installation configuration

1/0 PANEL

PANEL

*Note: Settings are subject to change.

MEANING OF THE DUSTBIN SYMBOL

Protect our environment: do not dispose of clectical eq Impend in your domestic waste. USB30 USB3.2 Gen2 HDAUDIO RESETSW Biela’s retin any dentalcare escarpment dat you willno longer use to the colection points POWER SW HDDLED POWER LED provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use. of electrical and electronic equipment. = Information concerning where the equipment can be disposed of can be brained from  your local WK authorities.

MADE IN CHINA SR SRR R T imported by: COLORS Information Technoioay, L c € CIMorse, 45 -Pol.Ind. San Marcos 28306 Getare (Vadn) GF: 684045574 – wwwcolors-it.es
www.abysmgaming.comAbysm
Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals