BOOM BUDDY 03813Portable Bluetooth Speaker User Guide

BOOM BUDDY 03813Portable Bluetooth Speaker

What’s Included

Portable Bluetooth
Speaker …………………. xl

Type C Charging
Cable ……………………. xl

Portable
Rope …………………… xl

Quick-Start
Guide ………………….. xl

Button Controls

| Power On/Off| Press and hold for 2 seconds
| Volume Up| Short press
| Volume Down| Short press
| Next Track| Long press
| Previous Track| Long press
| Play/Pause| Short press
| Enable/Disable Colorful Light| Short press
| Answer/End A Call| Short press
| Reject A Cal I| Double Click

Power Indicator

Specifications

Specifications are subject to change without notice.

Playtime
(varies by volume level and content)| Up to 24 Hours
(30%volume)
Bluetooth Version| BTS.4
Range| 66ft/20m
Waterproof Rating| IPXS
Size| 20.00×7.00×7.l Scm/
7.87><2.87 x2.75 inch
Net Weight| l .OSlb/7 6.76oz/475g

Bluetooth Pairing

1. Bluetooth indicator flashes blue quickly indicating the speaker is waiting for pairing.

2. Open the Bluetooth Setting on your cellphone/device. search and select BB-GOl to pair.

3. Bluetooth indicator will flash blue slowly after paired.

4. When turned on, speakers will automatically connect to the last connected device if available. If not, speakers will enter airing mode.

Connecting a non-Bluetooth audio device with ‘the 3.5mm cable (AUX cable

not included)

1. Make sure your speakers battery has enough power and turn on the Bluetooth speaker.
2. Plug one end of the cable into your device’s headphone jack and the blue light becomes staying on Insert the other end into speaker.
3. Turn on your Bluetooth speaker and you can start playing music.
   Note: When the audio cable is plugged into the speaker. the Bluetooth will not be available.

Pairing two speakers to create a stereo pair (TWS mode)

You can pair two speakers together to create left and right channels and enjoy stereo sound.

1. Turn on both speakers. Their light bar will flash. indicating they are ready to pair.
2. Press and hold the button of one speaker until you hear a beep, then you will hear a prompt tone. indicating the two speakers are paired successfully. Do not turn on your phone’s Bluetooth function before the pairing is successful.
3. Turn on your device’s Bluetooth and tap ‘BB-GOT’, it will automatically connect one of the speakers. When the pairing is completed. you can enjoy wireless stereo sound from both speakers.

Note:

1. Before pairing two speakers together, please make sure that the two speakers are not connected to other devices via Bluetooth. If one of them is connected to another device, they will fail to pair with each other.
2. Please note that both speakers can control the volume.
3. For a better listening experience, please put the speakers within so feet of each other. To achieve the best result. place the speakers in an open area without barriers.

Reset Your Speaker

(If your speaker is stuck)

1. Step l: Remove the charging cable and 3.5mm audio cable. if connected.
2. Step 2: Press and hold power button for 8 second. then release the power button.
3. Step 3: The speaker has now been reset and you can turn it on.

Wireless Hands-free Phone Call Function

Hands-free functions are only available for Bluetooth-enabled smartphones. Short press button to answer an incoming call. Short press again to end the call. Double-click the button to reject an incoming call.

Safety precautions

1. Do not charge by a water source or in the rain to prevent electric shock.
2. Please follow the instructions for all operations and use.
3. Do not damage the cable, especially at the connector.
4. Unplug the USB charging cable when it is not in use or during a thunderstorm.
5. Please keep the speaker away from heat sources (including all equipment that generates heat). such as stoves.
6. Do not disassemble the speaker.
7. Use officially certified chargers and cables.

 Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Limitation of Liability

Liability limited  to the purchase price of this product.TV Direct LLC shall not be liable for any consequential or incidental damages or any implied warranty on this product some states do not allow the exclusion or limitation of incidental or consequential damages ,so the above exclusion or limitation may apply to you.

Customer Support

Distributed by:
TV Direct LLC,
385, Fifth Avenue,
New York City, NY 10016
©2024
Item No: 03813
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>