hidealite LEDstrip 230V IP65 Instruction Manual
- June 8, 2024
- hidealite
Table of Contents
hidealite LEDstrip 230V IP65
TOOLS REQUIRED
Maximum bending radius
Do not twist
(mm)
Installation & Safety Instructions
- The installation should be performed by a qualified electrician.
- See the table of technical specifications and follow the instructions to perform the installation in a safe and correct manner; note the recommendations for maximum lengths.
- When two or more LEDstrips are interconnected, make sure the maximum recommended length is not exceeded.
- Make sure the power is switched off during installation and that the LEDstrips do not overlap to avoid overheating.
- It is important that the LED luminaire’s maximum specified ambient temperature is taken into consideration in order to guarantee its life span, if this is exceeded, the life span can be shortened drastically.
- Use the recommended/approved assembly fittings to ensure the lifespan of the LEDstrip.
- The LEDstrip must not be switched on when rolled up.
- LEDs are sensitive components and must be treated with care and not subjected to mechanical stress.
- The flexible LEDstrip must not be bent more than the recommended bending radius.
- The LED chip should not be exposed to direct sunlight when switched on.
- The self-adhesive tape is provide for easy installation.
- Use the supplied clips for permanent installation.
- When installed in the profiles (not uplight) recommends heat-resistant silicone for a permanent and sustainable installation.
- Do not apply silicone directly on the LED chip but along the sides.
Accessories
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain
for future reference. The luminaire should be installed by a licensed
electrician and in accordance with local regulations. Make sure that the power
is off before installation or maintenance
Installation
Installation – 10m kit
NOTE! SHORT CIRCUT RISK 230V! NEVER CONNECT BEFORE PRODUCT IS MOUNTED.
Installation – Cutting
NOTE! SHORT CIRCUT RISK 230V! NEVER CONNECT BEFORE PRODUCT IS MOUNTED.
Installation – Endcap
NOTE! SHORT CIRCUT RISK 230V! NEVER CONNECT BEFORE PRODUCT IS MOUNTED.
Installation – Profile
Documents / Resources
|
hidealite LEDstrip 230V
IP65
[pdf] Instruction Manual
LEDstrip 230V IP65, 230V IP65, LEDstrip IP65, IP65, LEDstrip
---|---
References
- LED lighting of the highest quality - Hidealite
- Vi udvikler og sælger LED belysning - Hidealite
- LED-valaisimet & LED-valaistus kotiin ja julkisiin tiloihin - Hide-a-lite
- LED-belysning, downlights, spotlights och utendørs belysning av topp kvalitet - Hidealite
- Hide-a-lite - LED-belysning & LED-armaturer för ditt projekt! - Hide-a-lite
- LED lighting of the highest quality - Hidealite