hidealite 7392971149431 Touch Panel RGBW Dali Instruction Manual

hidealite 7392971149431 Touch Panel RGBW Dali

Product Information

Specifications:

• Product Name: Touchpanel RGBW DALI
• IP Rating: IP20
• Control Protocol: DT8
• Dimensions: 86mm x 41mm x 32mm
• Power Supply: 100-240VAC/DALI bus
• Output Operation Current: DALI signal

Product Usage Instructions

Safety Instructions:
Read these instructions carefully before commencing installation and retain for future reference. All connections to the driver must only be made by a qualified electrician or a person with the necessary expertise in electrical installation in accordance with the relevant rules and standards. Make sure that the power is off before installation or maintenance.

Installation:

1. Ensure the power supply is switched off before starting the installation.
2. Mount the touchpanel in a suitable mounting box.
3. Connect the touchpanel to the driver following the wiring diagram provided.
4. Use a qualified electrician for all electrical connections.

Operation:
The touchpanel allows control of RGBW lighting using the DALI protocol. Use the rotary switches to assign scenes and groups for lighting control.

FAQ

Q: What is the purpose of the rotary switches on the touchpanel?
A: The rotary switches are used to assign scenes and groups for controlling the RGBW lighting fixtures connected to the touchpanel.

Touchpanel RGBW DALI

DIMENSION

SAFETY INSTRUCTIONS

Read these instructions carefully before commencing installation and retain for future reference. All connections to the driver must only be made by a qualified electrician or a person with the necessary expertise in electrical installation in accordance with the relevant rules and standards. Make sure that the power is off before installation or maintenance.

• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.

Power supply| Output| Operation current| DALI bus output| DALI consumption| Ta| Relative humidity| Dimensions| IP Class
---|---|---|---|---|---|---|---|---
100-240VAC/DALI bus| DALI signal| <15 mA| 100 mA max.| 4 mA| 0-40°C| 8% to 80%| 86x86x41mm| IP20

• Touch sensitive.
• Glass interface.
• Comply to DALI standard protocol IEC 62386-102, IEC 62386-207, IEC 62386-209 and in compliance with DALI products from other international incorporation
• Built-in 100mA DALI power supply to power up to max. 50 DALI ECGs
• Powered by DALI bus while not connected to AC mains
• Max. 100 DALI ECGs on a DALI line can be controlled by 4 control panels via broadcast (2 by AC mains, 2 by

DALI bus)

• Enable to control 1 DALI Group and 4 DALI Scenes.
• Enable to set start DALI group number (0-15) and scene number (0-15) by rotary switches on the back.
• Support DT8 devices
• Color adjustment according to DALI specifications of Device Type 8, Color Type RGBWAF.
• Each DT8 device is controlled via a single DALI address
• Built-in 8 Color Sequences

Operation

Set starting Group number via rotary switch on the back: (0-15 selectable)

• This DALI touch panel controller enables dimming commands and DT8 commands to be sent to 1 Group of devices on the DALI circuit. A rotary switch on the back is used to select Groups you would like to control and set the starting Group number, and total 16 Groups (0-15) can be selected.
• When the rotary switch arrow position is at 0, the panel controls all DALI devices on the circuit via broadcast.
• When the rotary switch arrow position is at X except 0 (1-15), the panel controls DALI Group X-1.

Note : all DALI slaves on the circuit shall be assigned to one or more DALI groups by DALI master first.

Please refer to the detailed Group setting table as follows:

14

Set starting Scene number via rotary switch on the back: (0-15 selectable)

• This DALI touch panel controller enables Scene selection commands for up to 4 Scenes to be sent to the DALI circuit. A rotary switch on the back is used to select Scenes you would like to control and set the starting scene number, and total 16 Scenes (0-15) can be selected.
• When the rotary switch arrow position is at X (0-15), Scene button S1 controls Scene X, S2 controls Scene X+1, S3 controls Scene X+2, and S4 controls Scene X+3.
  Please refer to the detailed Scene setting table as follows:

Figure 1: Wiring scheme to control up to 50 DALI ECG via broadcast or control 1 DALI group.

Figure 2: Wiring scheme with 2 DALI panels powered by AC mains to control up to 100 DALI ECG via broadcast or control 1 DALI group.

1. To control up to 100 ECG with the setup (Figure 2), there are 2 panels connected to AC mains.
2. To control up to 50 ECG with the setup (Figure 1), there is only 1 panel connected to AC mains. Other panels are powered by DALI bus. Max. 2 DALI panels can be connected to AC mains in the same control circuit.

Elektro Elco AB, Tallvägen 5, SE-56435 Bankeryd, Sweden | [email protected] | www.hidealite.se | www.hidealite.com | www.hidealite.fi| www.hidealite.no | www.hidealite.dk

References

• Svenska institutet för standarder, SIS - Svenska institutet för standarder, SIS
• LED lighting of the highest quality - Hidealite
• Vi udvikler og sælger LED belysning - Hidealite
• LED-belysning, downlights, spotlights och utendørs belysning av topp kvalitet - Hidealite
• Hide-a-lite - LED-belysning & LED-armaturer för ditt projekt! - Hide-a-lite

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>