hidealite LEDstrip 24V IP67 TW Top Bending LED Strip Instruction Manual
- May 15, 2024
- hidealite
Table of Contents
LEDstrip 24V IP67 TW
LEDstrip 24V IP67 TW Top Bending
LED Strip Instruction Manual
LEDstrip 24V IP67 TW Top Bending LED Strip
| |
---|---|---
E-nr| Snro| El.nr| GTIN| Length| Max. Length| LED color| LED/m| Output max/m|
Voltage DC
---|---|---|---|---|---|---|---|---|---
*7510488| 4158553| 3217612| 7392971150185| 5m| 8m| 2600+6500K| 240pcs| 18.9W|
7510489| 4158554| 3217613| 7392971150192| rm| 8m| 2600+6500K| 240pcs| 18.9W|
For explanation of symbols seewww.hidealite.se
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance.
Find your Profile
Suitable profiles at www.hidealite.com
Installation & Safety Instructions
- The installation should be performed by a qualified electrician.
- See the table of technical specifications and follow the instructions to perform the instal lation in a safe and correct manner, note the recommendations for maximum lengths.
- Make sure that the LED strip’s voltage corresponds with that of the drive unit and ensure that the polarity is correct.
- When two or more Ledstrip are interconnected, make sure the maximum recom- mended length is not exceeded.
- Make sure the power is switched off during installation and that the Ledstrip do not overlap to avoid overheating.
- It is important that the LED luminaire’s maximum specified ambient temperature is taken into consideration in order to guarantee its life span, if this is exceeded, the life span can be shortened drastically.
- Use the recommended/approved assembly fittings to ensure the lifespan of the Ledstrip.
- The Ledstrip must not be switched on when rolled up.
- LEDs are sensitive components and must be treated with care and not subjected to mechanical stress.
- The flexible Ledstrip must not be bent more than the recommended bending radius.
- The LED chip should not be exposed to direct sunlight when switched on.
- The self-adhesive tape is provide for easy installation. Use the supplied clips for permanent installation. When installed in the profiles (not upplight) recommends heat-resistant silicone for a permanent and sustainable installation. Do not apply silicone directly on the LED chip but along the sides.
Installation
|
---|---
Elektro Elco AB, Tallvägen 5, SE-56435 Bankeryd, Sweden
info@elco.se | www.hidealite.se
www.hidealite.com | www.hidealite.fi
www.hidealite.no |
www.hidealite.dk
Version:2023/11
Documents / Resources
|
hidealite LEDstrip 24V IP67 TW Top Bending LED
Strip
[pdf] Instruction Manual
LEDstrip 24V IP67 TW Top Bending LED Strip, LEDstrip 24V IP67 TW, Top Bending
LED Strip, Bending LED Strip, LED Strip
---|---
References
- LED lighting of the highest quality - Hidealite
- Vi udvikler og sælger LED belysning - Hidealite
- LED-belysning, downlights, spotlights och utendørs belysning av topp kvalitet - Hidealite
- Hide-a-lite - LED-belysning & LED-armaturer för ditt projekt! - Hide-a-lite
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>