WALA-DW Q-CAP Flexible Fixtures – MICRO 5 SERIES

Mounting

WSC-02:
WHITE SNUG CLIP
– For indoor/outdoor use
– Surface mounting
– Stainless steel/corrosion resistant
– Discrete mounting
– White glossy finish

MOUNTING HARDWARE
– #4 flat screw (one provided for each clip)
– 832 Silicone (sold separately)

MICRO5-PPS-2:
PVC MOUNT CLIP
– For indoor/outdoor use
– Surface mounting
– Wire way feature
– Off white finish
– Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)

MOUNTING HARDWARE
– #6 flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)

Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering

MICRO5-PPS-96 & MICRO5-PPS-FT:
PVC MOUNT CHANNEL

– 96″ (PPS-96) or custom length (PPS-FT)
– For indoor/outdoor use
– Surface mounting
– Field modifications made easy
– Wire way feature
– Off white finish
– Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)

Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering

MOUNTING HARDWARE

6 flat head screw (1 screw for every 16″) – 832 Silicone (sold separately)

MICRO5-PPS-LP-2:
PVC LOW PROFILE MOUNT CLIP
– For indoor/outdoor use
– Surface mounting
– Low profile mounting
– No wire way
– Off white finish

MOUNTING HARDWARE
– #6 Flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)

MICRO5-PPS-LP-96 & MICRO5-PPS-LP-FT:
PVC LOW PROFILE MOUNT CHANNEL

– 96″ (PPS-LP-96) or custom length (PPS-LP-FT)
– For indoor/outdoor use
– Surface mounting
– Low profile mounting
– No wire way
– Off white finish

MOUNTING HARDWARE
– #6 Flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)

Mounting Accessories

Q-ANGLE
(Full ordering guide and installation available for this product in the accessories section of website)

– Offset lighting to illuminate signs, artwork, etc.
– For indoor/outdoor use
– Wall, ceiling, or floor mounted
– Anodized aluminum/corrosion resistant
– Free moving rotating head which can be locked into specific angles
– Preset dial notches for easy adjustments from 90° to 270°

MOUNTING HARDWARE
– Mounting Clip
– 6-32 Fillister head screw
– 4-40 Flat head screw
– Drywall anchor (not provided)
– #6- 1 ¼ ” wood screw

Q-ANGLE MUST BE MOUNTED EVERY 12″
SEE Q-ANGLE INSTALL FOR MORE INFORMATION

Rated

DRY
– Lengths up to 191″
– Encapsulated in polyurethane
– NOT FIELD CUTTABLE

COMPATIBLE CONNECTORS

WET
– Lengths up to 191″
– Encapsulated in polyurethane
– NOT FIELD CUTTABLE

COMPATIBLE CONNECTORS

Lens

Light Orientation

Connectors

SEAMLESS

Order the PPS-2 to join two fixtures together with no visible break and order the PPS-96/PPS-FT or to support the fixtures, All seamless fixtures have CLEAR endcaps

Order the PPS-LP-2 to support two fixtures together with no visible break and order the PPS-LP-96/PPS-LP-FT to support the fixture

Connectors/Wire

BARE WIRE
– 22 AWG, 3 conductor
– Outdoor rated
– 24″ Standard length

CONNECTOR 6″ / CONNECTOR 24″
– 22 AWG, 3 conductor
– Indoor rated
– 6″ or 24″ Standard length

© 2021 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com 
www.q-tran.com
Specification subject to change. Rev-09-27-21

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>