Q-TRAN WALA-SW Q-CAP Flexible Fixtures Instruction Manual
- June 8, 2024
- Q-TRAN
Table of Contents
WALA-SW Q-CAP Flexible Fixtures MICRO 5 SERIES
Mounting
WSC-02:
WHITE SNUG CLIP
– For indoor/outdoor use
– Surface mounting
– Stainless steel/corrosion resistant
– Discrete mounting
– White glossy finish
MOUNTING HARDWARE
– #4 flat screw (one provided for each clip)
– 832 Silicone (sold separately)
MICRO5-PPS-2:
PVC MOUNT CLIP
– For indoor/outdoor use
– Surface mounting
– Wire way feature
– Off white finish
– Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)
MOUNTING HARDWARE
– #6 flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)
Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without
any screws interfering
MICRO5-PPS-96 & MICRO5-PPS-FT:
PVC MOUNT CHANNEL
– 96″ (PPS-96) or custom length (PPS-FT)
– For indoor/outdoor use
– Surface mounting
– Field modifications made easy
– Wire way feature
– Off white finish
– Can be mounted with or without
PPS-BRACKET (COVE FRIENDLY)
Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without
any screws interfering
MOUNTING HARDWARE
6 flat head screw (1 screw for every 16″) – 832 Silicone (sold separately)
MICRO5-PPS-LP-2:
PVC LOW PROFILE MOUNT CLIP
– For indoor/outdoor use
– Surface mounting
– Low profile mounting
– No wire way
– Off white finish
MOUNTING HARDWARE
– #6 Flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)
MICRO5-PPS-LP-96 & MICRO5-PPS-LP-FT:
PVC LOW PROFILE MOUNT CHANNEL
– 96″ (PPS-LP-96) or custom length (PPS-LP-FT)
– For indoor/outdoor use
– Surface mounting
– Low profile mounting
– No wire way
– Off white finish
MOUNTING HARDWARE
– #6 Flat head screw (1 screw for every 16″)
– 832 Silicone (sold separately)
Mounting Accessories
Q-ANGLE
(Full ordering guide and installation available for this product in the
accessories
section of website)
– Offset lighting to illuminate signs, artwork, etc.
– For indoor/outdoor use
– Wall, ceiling, or floor mounted
– Anodized aluminum/corrosion resistant
– Free moving rotating head which can be locked into specific angles
– Preset dial notches for easy adjustments from 90° to 270°
MOUNTING HARDWARE
– Mounting Clip
– 6-32 Fillister head screw
– 4-40 Flat head screw
– Drywall anchor (not provided)
– #6- 1 ¼ ” wood screw
Q-ANGLE MUST BE MOUNTED EVERY 12″
SEE Q-ANGLE INSTALL FOR MORE
INFORMATION
Rated
DRY
– Lengths up to 191″
– Encapsulated in polyurethane
– NOT FIELD CUTTABLE
COMPATIBLE CONNECTORS
WET
– Lengths up to 191″
– Encapsulated in polyurethane
– NOT FIELD CUTTABLE
COMPATIBLE CONNECTORS
Lens
Light Orientation
Connectors
SEAMLESS
Order the PPS-2 to join two fixtures together with no visible break and order the PPS-96/PPS-FT or to support the fixtures, All seamless fixtures have CLEAR endcaps
Order the PPS-LP-2 to support two fixtures together with no visible break and
order the PPS-LP-96/PPS-LP-FT to support the fixture
Connectors/Wire
BARE WIRE
– 22 AWG, 2 conductor
– Outdoor rated
– 24″ Standard length| DRY BARREL
– 22 AWG
– Dry rated
– 6″ Standard length including connector| WET BARREL
– 22 AWG
– Wet rated
– 6″ Standard length including connector
---|---|---
CONNECTOR 6″ / CONNECTOR 24″
– 22 AWG, 2 conductor
– Indoor rated
– 6″ or 24″ Standard length
Related Products
*Full ordering guide available for this product in the accessories section of website
© 2021 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
www.q-tran.com
Specification subject to change. Rev-09-27-21
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran