LEDALITE MI NatureConnect Daylight Island Instruction Manual
- June 8, 2024
- LEDALITE
Table of Contents
LEDALITE MI NatureConnect Daylight Island
Mounting instructions
- Daylight Island
- NatureConnect
Daylight driver
For mounting Daylights
Safety cable mechanism
Daylight panel in separate box
Tools not included
Daylight island
Mounting brackets
IMPORTANT
All Mounting brackets (4 each side) need to be installed on Daylight
Install driver plate
Connect driver and screw top box
Safety cable installation
- Insert safety cable trough frame part as image
- Install gripper on backplate cover tab of Daylight
- Insert cable through gripper
- Adjust cable length as tight as possible (image as reference)
- Final position reference length on gripper side
IMPORTANT
Do NOT install Daylight without Safety cable
- Insert cable end thru gripper nut side
- Adjust to desired cable lenght
- Lock Gripper nut
Inrush current
Electrical characteristics
Max. inrush Current <200m s
- MCB Max n. of lumin.
- B- 10 A 22
- B- 16 A 36
- C- 10 A 22
- C- 16 A 36
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- The light source of this luminaire is not replaceable; when the light source reached its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer, his service agent or similar qualified person in order to avoid hazard.
- During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
- To remove dust and spots use the following:
- Dust: use micro fiber cloths only
- Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.
- The product is IPX0 & as such is not protected against water ingress & as such we strongly recommend that the environment in which the luminaire is to be installed is suitably checked.
- If the above advice is not taken and the luminaires are subject to water ingress, Signify cannot guarantee safe failure & product warranty will become void.
Note: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
FCC
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial enviroment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Data subject to change without notice www.signify.com/natureconnect
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>