FUJITSU ETERNUS AF150 S3 All Flash Arrays User Guide
- July 20, 2024
- FUJITSU
Table of Contents
FUJITSU ETERNUS AF150 S3 All Flash Arrays
Specifications
- Product Name: Fujitsu Storage ETERNUS AF150 S3 All-Flash Arrays
- Product ID: P3AG-4102-04ENZ0
- Optional Products: Host Interfaces, SFP+ Modules, Value SSDs, Power Cords, Power Distribution Units
Product Usage Instructions
Host Interface Installation
Depending on your requirements, choose the appropriate host interface for
the ETERNUS AF150 S3. Below are the available options:
- Host interface for AF150 S3 (16Gbit/s, FC, 4 ports)
- Host interface for AF150 S3 (32Gbit/s, FC, 4 ports)
- Host interface for AF150 S3 (10Gbit/s, iSCSI, 4 ports, without SFP+)
- Host interface for AF150 S3 (10Gbit/s, iSCSI, 4 ports, RJ-45)
Value SSD Installation
Choose the appropriate Value SSD based on your storage requirements.
Available options include:
- Value SSD (2.5inch) 960GB x1 for ETERNUS AF150 S3
- Value SSD (2.5inch) 1.92TB x1 for ETERNUS AF150 S3
- Value SSD (2.5inch) 3.84TB x1 for ETERNUS AF150 S3
Power Cord and Power Distribution Unit Setup:
Ensure you have the correct power cord for your region and set up the power
distribution unit if required. Available options include different power cord
lengths and types.
FAQ
-
Q: When was the ETERNUS AF150 S3 first produced?
A: The ETERNUS AF150 S3 has been in production since 2019. -
Q: What are the optional products available for the ETERNUS AF150 S3?
A: Optional products include various host interfaces, SFP+ modules, Value SSDs, power cords, and power distribution units.
Product List
Fujitsu Storage ETERNUS AF150 S3 All-Flash Arrays
P3AG-4102-04ENZ0
This manual provides lists of the optional products for the ETERNUS AF150 S3 and describes possible combinations. Click the product name to check the package contents list.
Remarks
The ETERNUS AF150 S3 has been produced since 2019.
ETERNUS AF150 S3
| Product name | Product ID | EOL | Component items |
|---|
ETERNUS AF150 S3
ETERNUS AF150 S3| ET153SAU| **** 2024/3|
- 2.5″ type controller enclosure x 1
- Controller x 2
- Memory module (16GB) x 2
- Rack mount kit x 1
ETERNUS AF150 S3 (for China Region)
| Product name | Product ID | EOL | Component items |
|---|
ETERNUS AF150 S3
ETERNUS AF150 S3(non-encryption type)| ET153SADU| **** 2024/3|
- 2.5″ type controller enclosure x 1
- Controller x 2
- Memory module (16GB) x 2
- Rack mount kit x 1
Optional Products
Package Contents List
Check the list of package contents for the purchased product to confirm that
no items are missing.
If there is a missing item, contact your sales representative.
Some optional products are shipped after they are installed in the base unit
and other optional products are shipped in a separate package without being
installed in the base unit.
When an optional product without a “-L” at the end of its product ID is
purchased with the base unit, the optional product is installed in the base
unit in the factory before shipment.
ETERNUS AF150 S3
Host Interface
- Host interface adapter (x 2)
SFP+ Module
Drive
Power Cord
Power Cord
Model Upgrade for AF150 S3 to AF250 S3
Fujitsu Storage ETERNUS AF150 S3 All-Flash Arrays Product List
P3AG-4102-04ENZ0
Date of issuance : March 2024
Issuance responsibility: Fujitsu Limited
- The content of this manual is subject to change without notice.
- This manual was prepared with the utmost attention to detail.
- However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual.
- Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.
- The content of this manual may not be reproduced or distributed in part or in its entirety without prior permission from Fujitsu.