Vanstone QL-MINI.U2-A Mini Massage Gun User Manual

Vanstone QL-MINI.U2-A Mini Massage Gun

Vanstone Pty Ltd, trading as Vanstone.

• Email: contact@thevanstone.com
• Address: Suite 166, 16/77 Bourke Road, Alexandria, NSW. 2015. Australia.

Thank you for purchasing your Vanstone Mini Massage Gun.
Before using this product, please read the instructions carefully. Please keep this User Manual and fill out the Warranty Card (page 16) for warranty purposes. Mini Massage Gun Model Number: QL/MINI.U2-A Mini Massage Gun Serial Number (can be found near the charging port on the bottom of the device).

Warnings and Safety Precautions

Symbol Key
Please read the following carefully before use, to prevent potential damage, danger and/or injury. The following is applicable for the main unit and its attachments.

WARNING!

• This device is designed to be used by healthy adults, excluding the elderly.
• Not suitable for children or persons under the age of 13. For use under adult supervision only.
• Use the device on the soft tissues of the body only and without causing pain or discomfort.
• Do not use the device on your head, or any other hard or bony parts of the body.
• Pressure application with the device may cause bruising. Continue to check the massage area and stop use immediately should you feel (or see) signs of pain or discomfort.
• Use on clean and dry skin only, pressing and moving gently over the surface.
• Keep your hair, fingers and other body parts away from the shaft and back of the massage attachment head to prevent getting caught.
• Do not apply to areas with less muscle coverage such as the shins, back of the feet or the back of the hands.
• Do not use the product on or around sensitive areas such as eyes, teeth, breast implants, genital organs, artificial limbs, etc.
• Do not apply this device to any parts liable to fracture.
• If pain persists, stop using the device immediately and consult a healthcare practitioner.
• This product is not a medical device and is not recommended for medical use or use in hospitals.
• Before using the device, please check that the device and provided cables are in good and undamaged condition. If damage is present, it must be replaced by the manufacturer or appointed professional to avoid danger.
• Do not leave the device (including the heat attachment) operating or charging unattended.
• Do not place any objects in or block the ventilation hole.
• Do not submerge the device into water or get it wet, including the ventilation hole.
• Do not drop the device.
• Do not operate the device while it is charging.
• Do not use the device and attachments for more than one hour continuously. Stop using the device and allow it to rest for 30 minutes prior to its next use.
• Beware heat attachment produces heat electronically and should not be left unsupervised in case of overheating leading to risk of fire.
• Do not leave the heat attachment unattended or on flammable materials.
• Allow the heat attachment to cool before placing back into its storage case.
• May contain hazardous components for young children. Beware choking or suffocation from packaging materials if unboxing around children.
• THIS PRODUCT IS NOT A MEDICAL PRODUCT.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help with the supplied fastener. DO NOT hang the unit by the power chord.

RoHS Declaration
Our product is compliant with RoHS 2.0 (2011/65/EU Directive) regarding the restriction of hazardous substances. The raw materials and components of our product meet the following toxic and hazardous substance limits:

<1000ppm
Bis (2‑Ethylhexyl phthalate (DEHP): <1000ppm| Benzyl butyl phthalate (BBP): <1000ppm
Dibutyl phthalate (DBP): <1000ppm| Disobutyl phthalate (DIBP): <1000ppm

Disclaimer
Please contact your healthcare practitioner before using the Vanstone QL/Mini.U2-A Massage Gun if you have any physical health concerns or the following applies to you:

• Pregnancy
• Diabetes
• Epilepsy
• Migraines
• Herniated disks
• Spondylolisthesis
• Recent joint replacements
• IUDs

Please also contact your physician before use if you have recently undergone surgery or have any metal pins or plates in your body.

Battery Disposal

Please support the recycling of rechargeable batteries (lithium-ion batteries).
The battery used in this product is a special rechargeable battery which can not be used in other products. Please do not remove the battery from this device. Please take the device to an accredited recycling facility in your area upon disposal.

WEEE Instructions
Correct Disposal of this Device
This marking indicates that this product should not be disposed of with other unsorted household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Battery Instructions

• Do not submerge the device into water or get it wet.
• Do not charge the battery in extremely hot conditions or near an open flame.
• If the battery leaks or emits an odor, immediately remove it from close proximity to an open flame.
• Do not put the device into a fire or heat it up in any way.
• Do not disassemble the device or battery in any way.
• Do not use the device if, while the battery is in use or charging, it emits an odor, gives off excessive heat, and shows signs of deformation, discoloration, or any other abnormalities. If the battery is in use or being charged, remove it from the apparatus or charger immediately.
• Do not tamper with the battery or use any objects to alter the device or battery in any way, including but not limited to piercing the battery.
• Keep any removed rechargeable battery out of the reach of infants and children. If an infant or child has swallowed the battery, see a doctor immediately.
• If any battery liquid leaks, do not touch the liquid with your bare hands. If any battery liquid touches bare skin, wash the area immediately and seek medical advice.
• Do not store your battery in direct sunlight, extreme temperatures, or under heavy objects.
• When charging, set the device and power adapter in an open space away from combustible material.
• Only when the product is discarded can it be disassembled for recycling by professional recycling organizations?
• Use the included USB‑A to USB‑C cable for charging only.

Overview

Profile
Use the Vanstone Mini Massage Gun to massage muscles with various attachments before, during or after a workout. The massage gun and heat attachment can help with muscle conditioning and recovery as well as overall body relaxation.

Technical Specifications

• Product Name: Mini Massage Gun
• Product Model: QL/MINI.U2‑A
• Vibration Frequency: < 60 Hz
• Rated Power: 25W
• Massage Gun Battery:
  • Capacity: 2000mAh
  • Rated Voltage: 11.1V ****
  • Charging time: 180 minutes
• Heat Attachment:
  • Capacity: 600mAh
  • Rated Voltage: 3.7V ****
  • Heating Temperature: <60˚C / <140˚F
• Dimensions:

Device & Attachments

Attachments

• Heated Head
  • May help speed up blood circulation for recovery, reducing and relieving muscle stiffness, soreness and fatigue.
  • Best used on large muscle groups including but not limited to glutes, quads and upper traps but can be used on most parts of the body.
• U‑Shaped Head
  • Best used for soft tissues and more sensitive muscles including the spine and neck.
• Round Head
  • Best used on large muscle groups including but not limited to glutes, quads and upper traps.
• Bullet Head
  • Best used for targeted massage including trigger points and deep tissues. Can be used for joints or smaller muscle groups and areas such as the wrist, palms, ankles and soles of feet.
• Flat Head
  • Can be used on most parts of the body and is a great general head.
    Note: each attachment includes a set of rubber rings. If the rings become worn or damaged, please replace them with the spares included in the package.

Device Operation

Before Use

• Unbox the device and attachments and ensure all of the pieces are there. If not, please contact the supplier.
• Before using the device for the first time, charge the device to 100% (approximately 3 hours).
• Before using the heat attachment for the first time, charge the attachment to 100%.
• Connect the output end of the connection cable to the bottom of the device via its DC charging port. Then, connect the input end of the connection cable to a power bank or charger (5V 2A; if less than 2A, the total charging time will be longer).
• The power indicator light will flash red while charging and will automatically turn off when fully charged.
• The above three points are applicable for the heat attachment as well.

Charging

• The battery can be charged at any time.
• The device cannot be charged while in use.
• While the device is on, if the red indicator light is illuminated, the battery level is below 30%.
• If the red indicator light is illuminated and flashing, the battery level is below 20% and charge is required.
• When charging the heat attachment, the middle red indicator light will flash.
• The average working time is one hour depending on massage level and pressure.

Operation Steps
Removing and Replacing Attachments

• Ensure the massage gun is powered off.
• Firmly insert the stem of the massage head into the device.
• To replace, firmly pull the massage head out of the device.
• Note: The U-shaped head will need to be installed as shown in the attached, with the buckle aligned to the slot in the device. If done incorrectly, the attachment is likely to fall out of the device while in use.

Using the Device

• When the device is powered off, press“ ” button on the panel for two (2) seconds and the device will automatically turn on and to level one (1).
• Press the button again to shift into speed level two (2). Continue to press the same button to shift speed levels on the device between standby (0), one (1) and five (5).
• To power off the device, press and hold the button for two (2) seconds.

Note

• The device will automatically change to standby mode or level zero (0) at ten (10) minutes of operation.
• The device will automatically power off after no operation for 20 seconds while in standby (level 0) mode.
• The LED light panel on the device indicates the corresponding speed level: the lowest at level one (1) and the highest at level five (5).
• The heat attachment when properly installed in the device will automatically turn on and begin heating from level one (1).
• Allow the heat attachment to warm up for approximately one (1) – two (2) minutes for best results.
• For best results with heat attachment, skin contact is recommended.

Warranty

Troubleshooting
If you are experiencing issues with your device, please follow the below steps to assist in troubleshooting:

• Recharge the device fully using the USB‑C cable for 3‑4 hours.
• The battery light should be showing green while receiving charge.
• Press and hold the power button for 3‑5 seconds.

Device Maintenance

• Use a damp (not wet) cloth following with a dry towel to carefully clean the device.
• If not in use for long periods of time, store the device in its case and charge once a month for sustained battery life.
• For the first one (1) to three (3) uses, charge the battery to 100% and fully deplete the device to 0% before re‑charging.
• The device should be stored in its case in a dry, ventilated and non-corrosive environment.

Guarantee

• This product comes with a one (1) year warranty from the date of purchase. Warranty will be void due to any of the following:
• The device was disassembled or tampered with in any way.
• The device was damaged through improper use or handling, including being dropped.
• The device was not reasonably maintained.
• The period of warranty has ended.
• For warranty or after‑sales services, please contact your retailer or email Vanstone on contact@thevanstone.com.

Transportation & Storage

• Ambient Temperature: ‑4˚F ‑ 122˚F / ‑20˚C ‑ +50˚C
• Relative Humidity: ≤90%
• Atmospheric Pressure: 10.15psi – 15.37psi / 70kPa – 106kPa
• Suitable for general transportation. During transportation, the product should be prevented from direct rain, snow, or mixed with corrosive substances.
• No more than 5 box layers stacked on top of each other.
• The product should be stored in a dry, ventilated and non-corrosive environment.

Warranty Card

Documents / Resources

| Vanstone QL-MINI.U2-A Mini Massage Gun [pdf] User Manual
QL-MINI.U2-A Mini Massage Gun, QL-MINI.U2-A, Mini Massage Gun, Massage Gun, Gun
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>