ardo IFU V02 Breast Milk Bottle Set Instruction Manual
- August 8, 2024
- ardo
Table of Contents
ardo IFU V02 Breast Milk Bottle Set
Package contains
- 3 bottles (150 ml),
- 3 lid rings,
- 3 lid liners
Intended use
This breast milk bottle is used for expressing (in combination with a
pumpset), storing and feeding breast milk. It is intended for multiple use and
can be safely sterilized.
Expressing breast milk
To express breast milk, connect the milk bottle directly to the pumpset (e.g.
Ardo pumpset).
Storage of breast milk
After expressing the milk, close the milk bottle using the lid.
Breast milk can be stored as follows:
- at room temperature 16–29 °C (60–85 °F): 3-4 hours optimally; 6-8 hours are acceptable under very clean conditions
- in the refrigerator ≤ 4 °C (39 °F): 72 hours optimally; 5-8 days are acceptable under very clean conditions
- in the freezer< –17 °C (0 °F): 6 months optimally; 1 year is acceptable
DO NOT fill more than 150 ml into bottles, as milk expands when frozen.
Feeding breast milk
Breastfeeding must be well established before using other feeding methods.
Thaw the breast milk, which was stored in the freezer, first in the
refrigerator or at room temperature. Then warm the breast milk to about 37 °C
(98 °F) by immersing the bottle in warm water or holding under lukewarm
running water.
Breast milk should not be heated in a microwave.
Manual cleaning
Before using for the first time and after each time it is used:
- Dismantle the product into its individual parts
- Rinse for at least 1 minute using cold tap water.
- Clean the components of the bottle with commercial detergent and warm water (not over +40°C) and rinse with cold tap water. Make sure that all detergent residues are removed.
- A soft brush can also be used for heavy soiling.
- Allow all parts of a clean surface to air dry.
Manual disinfection
1x daily after manual cleaning
- Make sure there is enough water in the pot in order to prevent damage/deformation.
- Boil the parts for 5 minutes.
- Allow the parts to cool down and dry on a clean surface.
Check the individual parts for cracks and changes to the surface according to
the cleaning and disinfection process.
If you discover any changes, dispose of the part affected and replace with a
new one.
Material
Milk bottle, lid ring, lid liner: Polypropylene
Important notice: Plastic bottles and lids may become brittle if frozen
and damaged if dropped. DO NOT use breast milk if bottles and lids are
damaged.
Disposal
According to the local regulations
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>