Fontastic 253966 Wi-Fi Alarm Motion Sensor 7m Instruction Manual

: June 8, 2024
: fontastic

Table of Contents

WiFi Motion Detector
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WiFi Motion Detector

Thank you for choosing this Fontastic® product.

The following pages explain the operation and functions of the WiFi motion detector.
Please take a moment to read this quick guide.
Please observe the safety instructions.

Package content

Overview

Fontastic 253966 Wi-Fi Alarm Motion Sensor A01

PIR lens
LED
Holder
Button (Cover open)
Battery compartment (Cover open)

Get Started

The Fontastic smart home motion detector integrates itself everywhere due to its compact design and is less noticable. Whether at home or on the go – you are immediately informed visually via LED and push notification. The FontaHome App allows you to program further automations. The sensor is easy to install and connects seamlessly to your home WiFi via the FontaHome app. You can combine the motion detector with other Fontastic smart home devices and control it via the FontaHome App for iOS and Android.

Inserting the battery

The motion detector is powered by a CR123 lithium battery.

Remove the motion detector from the holder.
Remove the battery cover by holding the upper part of the motion detector and turning the lower part clockwise.
The supplied battery is already inserted. Remove the plastic strip between the battery and the contact to power the motion sensor.
Reinsert the motion detector into the holder.

Mounting

Mount the holder of the motion detector either using the supplied adhesive pad or screw it together. To fasten with screws, remove the motion detector from the holder.
Freely adjust the position of the motion detector.
Make sure that the motion detector functions within the desired range.

Note: A maximum of one movement per minute is registered.

App installation

Get the „FontaHome“ app from Google Play, the App Store, or follow the QR code or link (URL: www.d-parts.de/app/fontahome)

Registration

You must register before using the FontaHome app. You can choose from various registration options.

Note: It is technically not possible to use the app without registration. Please note the privacy policy for the processing of your personal data in the app or at d-parts.de/privacy_fontahome.

Note: Make sure the polarity is correct when inserting the battery.

Configuration (easy mode)

Power the motion detector as described above.
As soon as the LED quickly fl ashes (approx. 2 times/second), the device can be configured (simple mode). If the LED does not fl ash as described, press and hold the button on the device until it quickly flashes.
Open the FontaHome app, log in and press the „Add Device“ or the „+“ symbol.
Allow the device to connect to the wireless network connected to your phone by entering the wireless network password and follow the instructions in the app. Make sure that new devices can be added to the wireless network.
After adding the new device, the detail page opens.

Note: If configuration does not work in simple mode, use AP mode. The device sets up an access point to which you must connect your phone.

Configuration (AP mode)

Power the motion detector as described above.
As soon as the LED slowly fl ashes (approx. once every 2 seconds), the device can be configured (AP mode). If the LED does not flash as described, press and hold the button on the unit until it slowly flashes.
Open the FontaHome app, log in and press the „Add Device“ or the „+“ symbol.
Press „AP“ in the upper right corner.
Allow the device to connect to the wireless network connected to your phone by entering the wireless network password and follow the instructions in the app.
Connect your phone to the „Smart Life-XXXX“ WiFi network created by the device, with the last four digits varying.
After adding the new device, connect the desired appliance to the device.

Note: The device and app only supports 2.4GHz WiFi networks. If the connection fails, please refer to the „FAQ“ menu in the app. We recommend that you give the device a unique name, e.g. „Motion detector corridor“.

For the integration of IFTTT please look in the FontaHome App in the „Profile“ section under „3rd party integration“.

You can share the devices connected to your FontaHome account with other FontaHome users so that your friends and family can access the devices

Open the device share in the „Profile“ menu.
Select the devices you want to share.
Select the members you want to share.

Alternatively, you can go to the menu of the device and select „Device Sharing“.

Reset Device to Factory Settings

To reset the device to factory settings and delete WiFi settings, go to the devices menu in the app and select „Factory settings“, or press and hold the button on the device until it flashes.

No commitment for any damage at misuse.

In case you need technical support, please contact our support team at our website under support.fontastic.eu.

Safety advice:

Do not dismantle the device.
Do not immerse the device in water and protect it from humidity.
Never use the device if it is visibly damaged.
Do not operate the unit outdoors or in rooms with high humidity

Technical Data:

WiFi Standard: Generation 4 (2.4GHz), range 45m
Detection angle: 110°
Detection range: 7 meters
Power supply: 1x battery CR123A-3V
Batterie life: 5 years
Power consumption stand by: 13μA
Operating temperature: 0°C – 40°C
Operating humidity: 20% – 85%
Dimensions: 48 x 48 x 48 mm
Weight: 46g

Note on environmental protection:

After the implementation of the European Directive 2012/19/EC in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defned by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, re-using the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.

Registration and Safety

Certifcation/General Information
We hereby declare, that this device carries the CE mark in accordance with the regulations and standards. It conforms with the fundamental requirements of the (RED) 2014/53/EU directive.

App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
©2018 Google LLC All rights reserved. Google and Google Play are trademarks of Google LLC.
IFTTT and the IFTTT wordmark are trademarks of IFTTT Inc.

Improvement and changes of the technical specifi cations and other data’s could be made without prior notice Fontastic, by D-Parts Mobilphon & Zubehör GmbH ● Birkenweiherstr, 16 ● 63505 Langenselbold, Germany / V1_12_18