vivo V2160 Smartphone User Guide
- June 8, 2024
- Vivo
Table of Contents
V2160 Smartphone
User Guide
Please read this Quick Start Guide before using your phone, and keep it for future reference.
Welcome to vivo
This Quick Start Guide tells you how to set up your phone and use its key
features. For more detailed instructions, turn on your phone, and then go to
Settings > About phone > Customer service > Manual. You can also learn
more useful information on vivo’s official website.
For legal information, go to Settings > About phone > Legal information.
For the FCC ID of this phone, please go to Settings > About phone >
Status.
The features and images shown in this guide are for reference only. They may
differ from the actual product.
It is recommended to charge the device for at least 30 minutes before turning
it on for the first time.
Special Instructions
Ambient Light Sensor & Proximity Sensor
The ambient light sensor and proximity sensor of this device are hidden on
the lower right side of the receiver. To ensure the sensors function well,
please keep them away from any dust, grease or light-proof film. Using a
third-party screen protector may trigger alerts for blocked sensors or cause
the locked screen, so you need to cut the film to expose the sensors.
Product Standard Accessories
- Cell hone × 1
- Charger × 1
- USB able × 1
- Phone case × 1
- Eject tool 1×
- Warranty card 1 ×
- Quick start guide 1 ×
Optimum operating temperature is 0℃ to 35℃ and optimum storage temperature is
-20℃ to 45℃.
Extreme heat or cold may damage your device or accessories.
Appearance
- Receiver
- Ambient light sensor &Proximity sensor (hidden hole)
- Front camera
- Volume button
- Power button& Fingerprint sensor
- Speaker
- USB port
- Main microphone
- Headset port
- Rear camera
- Secondary microphone
- SIM card tray
- Flash
- SIM card eject hole
Tips:
Insert/remove your SIM card using the provided eject tool. To avoid damaging
the device, do NOT remove the back cover. This phone supports standard Nano
card. Please go to your local carrier shops to change to standard Nano
card.
5G WiFi statement
Operation in the band 5150-5350MHz is only for indoor use to reduce the
potential for harmful interference to cochannel mobile satellite systems.
FCC SAR
Head: 0.84 W/kg
Body-worn: 0.69 W/kg（15mm distance）
Hotspot: 0.71 W/kg（10mm distance）
FCC statement
This device complies with part 15 of the FCC Rules .Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo
Mobile Communication Co.,Ltd. could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6W/kg. For bodyworn operation, this device
has been tested and meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and positions the device a minimum of 15mm
from the body. RF exposure compliance with any body-worn accessorythat
contains metal was not tested and certified, and use of such body-worn
accessory should be avoided. Accessory available in market and must be used to
keep use distance 15mm from EUT to body-worn operation.
Technical requirement:
- The appearance is in good condition, without wrinkle, damage, variegation, blurring, double printing, over scribing, less scribing, unsound binding, uneven trimming and other adverse phenomena.
- There are no errors, omissions, duplicate pages, few pages, multiple pages, wrong page number, wrong binding and other abnormalities in the content.
- Color difference should meet the requirements, the same batch of ink concentration is uniform.
- Comply with vivo environmental protection requirements, and upload the corresponding report to BPM system.
Versión: V1.0 5130200 FXXX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>