Q-TRAN ANYBEND-DWQ-CAP Micro 5 Series Flexible Fixtures Instruction Manual

June 8, 2024
Q-TRAN

Q-TRAN ANYBEND-DWQ-CAP Micro 5 Series Flexible Fixtures Instruction Manual
Q-TRAN ANYBEND-DWQ-CAP Micro 5 Series Flexible
Fixtures

Mounting

WSC-02:
WHITE SNUG CLIP

  • For indoor/outdoor use
  • Surface mounting
  • Stainless steel/corrosion resistant
  • Discrete mounting
  • White glossy finish

MOUNTING HARDWARE

  • 4 flat screw (one provided for each clip)

  • 832 Silicone (sold separately)

MICRO5-PPS-2:
PVC MOUNT CLIP

  • For indoor/outdoor use
  • Surface mounting
  • Wire way feature
  • Off white finish
  • Can be mounted with or without
    PPS-BRACKET (COVE FRIENDLY)

Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering

MOUNTING HARDWARE

  • 6 flat head screw (1 screw for every 16″)

  • 832 Silicone (sold separately)

MICRO5-PPS-96 & MICRO5-PPS-FT:
PVC MOUNT CHANNEL

  • 96″ (PPS-96) or custom length (PPS-FT)
  • For indoor/outdoor use
  • Surface mounting
  • Field modifications made easy
  • Wire way feature
  • Off white finish
  • Can be mounted with or without
    PPS-BRACKET (COVE FRIENDLY)
    Dimensions

Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering

MOUNTING HARDWARE

  • 6 flat head screw (1 screw for every 16″)

  • 832 Silicone (sold separately)

MICRO5-PPS-LP-2:
PVC LOW PROFILE MOUNT CLIP

  • For indoor/outdoor use
  • Surface mounting
  • Low profile mounting
  • No wire way
  • Off white finish

MOUNTING HARDWARE

  • 6 Flat head screw (1 screw for every 16″)

  • 832 Silicone (sold separately)

MICRO5-PPS-LP-96 & MICRO5-PPS-LP-FT:
PVC LOW PROFILE MOUNT CHANNEL

  • 96″ (PPS-LP-96) or custom length (PPS-LP-FT)
  • For indoor/outdoor use
  • Surface mounting
  • Low profile mounting
  • No wire way
  • Off white finish

MOUNTING HARDWARE

  • 6 Flat head screw (1 screw for every 16″)

  • 832 Silicone (sold separately)

Mounting Accessories

  • 90°

  • 120°

  • 150°

  • 180°

  • 210°

  • 240°

  • 270°

Q-ANGLE
(Full ordering guide and installation available for this product in the accessories section of website)

  • Offset lighting to illuminate signs, artwork, etc.
  • For indoor/outdoor use
  • Wall, ceiling, or floor mounted
  • Anodized aluminum/corrosion resistant
  • Free moving rotating head which can be locked into specific angles
  • Preset dial notches for easy adjustments from 90° to 270°.
    90° BACK VIEW

180° BACK VIEW

BASE; BOTTOM VIEW

MOUNTING HARDWARE

  • Mounting Clip
  • 6-32 Fillister head screw
  • 4-40 Flat head screw
  • Drywall anchor (not provided)
  • 6- 1 ¼ ” wood screw

Q-ANGLE MUST BE MOUNTED EVERY 12″

SEE Q-ANGLE INSTALL FOR MORE INFORMATION
MOUNTING HARDWARE

Rated

DRY

  • Lengths up to 191″
  • Lengths up to 191″
  • Encapsulated in polyurethane
  • NOT FIELD CUTTABLE

COMPATIBLE CONNECTORS

**BARE WIRE 24″

CONNECTOR 6″
CONNECTOR 24″
COMPATIBLE CONNECTORS**

WET
Instructions

**COMPATIBLE CONNECTORS

BARE WIRE 24″
**

Lens
LENS Instructions

Connectors
Connectors

Type
Connector Type

MICRO5-PPS-2

MICRO5-PPS-LP-2

Order the PPS-2/PPS-LP-2 to support two fixtures together with no visible break and order the PS-96/PPS-FT/PS-LP-96/PPS-LP-FT to support the fixture
Instructions

FIXTURE WITH BARE WIRE
Instructions

Connectors/Wire

BARE WIRE

  • 22 AWG, 3 conductor
  • Outdoor rated
  • 24″ Standard length
    BW

CONNECTOR 6″ / CONNECTOR 24″

  • 22 AWG, 3 conductor
  • Indoor rated
  • 6″ or 24″ Standard length

© 2021 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
www.q-tran.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals