RAZORRI 516-070-201 Smart Meat Thermometer User Manual
- June 8, 2024
- RAZORRI
Table of Contents
RAZORRI 516-070-201 Smart Meat Thermometer
Warnings
- Do not leave the probe in extremely hot foods or liquids (anything over 572°F/ 300°() for more than one minute.
- Always wear heat-resistant gloves to use the probe. Do not touch the probe or wire with bare hands during or right after measuring temperature since it may be very hot.
- Do not use this device in a microwave oven.
- Do not place this device in a place where the temperature is too high. Please operate the device within the ambient temperature range of 32°F to 122°F(o0c to so0c).
- Do not place the probe in the dishwasher or completely immerse it in any liquid. For cleaning, please wipe the probe tip with a damp soapy cloth or sponge and dry it.
- Do not use the device in the rain. The thermometer is not waterproof.
- Keep the probes and wires away from children. This device is not intended for use by persons under the age of 12.
- If this device is not in use for a long period of time, please remove its battery to prevent corrosion.
Specifications
- Model MTD4
- Material ABS, Food-grade Stainless steel
- Measurement Range -22° F to s12° F / -30° c to 300° C
- Alert Temperature Range -22° F to 572° F / -30 ° [ to 300° [
- Net Weight 6 oz ( 169 g)
- Battery Type AAA Batteries x 3
- working Voltage 4.SV
Package contents
Parts
| NO. | Part Name | Introduction |
|---|
13
|
Built-inMagnet
| To atta[h the devi[eon the refrigerator or other metal surfa[es.
14
|
Battery lid
| To proten the batteries and the Temperature AlarmButton@.
15|
Temperature AlarmButton
|
• Press to turn on/off the temperature alarm.
• Hold 3 sernnds to swit[h the temperature unit betweenFahrenheit and Celsius.
16|
Battery compartment
|
To insert 3 batteries.
17
|
Probe Tip
| The tip for the probe, to sense the temperature of the foods.
Instructions of the Device
Note:
- Before using, please install the batteries (included) in the battery compartment of the device.
- When there is no operation on the buttons for 10 seconds, the backlight of the device will automatically turn off to enter Low Power Mode.
Power on/off
Press and hold the Power/Set Button for 3 seconds.
Connect the probe to the device
Plug the connection port of the probe jacl< to the device. The screen will display the current temperature of the probe.
Switch the measurement unit
Remove the battery compartment cover on the device. Hold the Temperature Alarm Button for 3seconds until it beeps to switch the temperature unit between Fahrenheit and Celsius ( thedefault unit is Fahrenheit ).
Set the preset temperature
- Press the Power/set Button to enter the preset temperature setting.
- Press the”+”/”-” Button to increase/ decrease the value or hold the button to speed up the adjusting.
- Press the Power/Set Button to confirm the setting. Or wait for 10 seconds, the value will be automatically confirmed.
Note:
When the measured temperature reaches the preset temperature, the device will
start beeping and the value display will keep flashing. Press any button on
the device to stop the flashing and beeping.
Instruction of the App
App Installation 6 connection
You can set and check the temperature with the smart life App. Please download
it from the App Store for 105 or Google Play Store for Android. You can scan
the QR code here:
- Account registration and login
- Please register an account with a valid email address. After registration, check your inbox to get the verification code, then enter the code and set your password to log in.
- Connect the device to your phone
- Press and hold the Power/Set Button to turn on the device.
- Enable the Bluetooth of your smartphone
- Turn on the smart life App on your phone. Tap “Add Device”- “Auto scan”, the device will pop up.
- Tap “Go to add” and the connection will start to load.
- Wait for the connection to succeed.
Note:
- When the device has connected with the App before, simply turn on the device and open the App on the phone so the device can reconnect to your phone.
- If you fail to connect the device with your phone, press and hold the “+” and”-” Button together for 3 seconds to make the device enter connecting mode.
- The device can only connect with one smartphone at a time. When connected, please place your router, mobile phone, and the device as close as possible.
- An account can only be logged in on one device at a time.
- Please use the App in a networl<ed environment.
- The App is only compatible with smartphones, not tablets or PCs.
Using the smart life App
- Monitor the temperature
- After connecting the device, you can easily monitor the probe temperature on your phone.
- Preset the temperature
- Tap “Set up the probe”. select a type of meat and level of doneness.
- Tap “Conflrm” to save the setting.
Note:
When the probe temperature reaches the preset temperature, the device will start beeping and a reminder will pop up on the phone
Clean and Maintenance
Cleaning
- Before using the device, clean the probe with a soapy sponge or cloth, then rinse and dry it.
- Always take your reading in the thickest part of the meat, avoiding the bones and heavy fat parts. Because the thin parts of the meat are difficult to measure, they tend to cool< faster, and if the tip touches the bone or heavy fat parts, or the probe tip is not inserted deep enough, it’s hard to ensure accuracy.
- When measuring different foods or meats with the same probe, please cool the probe down first by rinsing the tip with cold water.
- After using the device, vou can sterilize the probe by inserting it in boiling water for several minutes.
- After using the device, hold the Power/Set Button for 3 seconds to turn it off for protecting the batteries.
Storage
After using the probes, you can use the included probe storage racl< to store them.
- Insert the stainless part of the probe into the storage racl<‘s slot and wrap the probe wire into the racl<.
- Press the connector of the probe into the rack
support@razorri.com
www.razorri.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>