legrand HT2302B Flat Panel TV Connection Kit Installation Guide

June 1, 2024
Legrand

Flat Panel TV Connection Kit
Models: HT2302B, HT2302C, HT2302K
Installation Instructions
Doc. #1507347 05/23 Rev C

Only for use with outlet boxes P116W, P116WC and S116W

Tools Needed

| | |
---|---|---|---
Tape Measure| Level| Stud Finder| Pencil
| | |
Drywall Saw| Phillips Screwdriver| Slotted Screwdriver|

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE
– SAVE THESE INSTRUCTIONS
Legrand electrical products conform to and should be properly grounded in compliance with requirements of the current National Electrical Code or codes administered by local authorities. All electrical products may present a possible electric shock or fire hazard if improperly installed or used. Legrand electrical products may bear the mark of a Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.
CAUTION: Avoid potential personal injuries and property damage!

  • WARNING – IMPROPER WIRING OF ANY ELECTRICAL WIRING DEVICE CAN CAUSE SERIOUS INJURY OR DEATH. THESE WIRING DEVICES SHOULD BE INSTALLED ONLY BY AN ELECTRICIAN OR OTHER QUALIFIED PERSON IN ACCORDANCE WITH ALL APPROPRIATE CODES AND STANDARDS. IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS OR ASSEMBLY, CONSULT A QUALIFIED ELECTRICIAN.
  • RISK OF FIRE AND SHOCK – Before installing, ensure power is of by switching of circuit breaker and test to confirm.
  • Do not use this product for any purpose not explicitly specified by manufacturer.
  • Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

NEW CONSTRUCTION

  1. ATTACH TO WOOD STUD
    TIP: For hard/dense studs, drill 1/8 in. (3mm) pilot holes.legrand
HT2302B Flat Panel TV Connection Kit - WOOD STUD

  2. ROUTE THE CABLES
    RISK OF FIRE AND SHOCK –
    Before installing, ensure power is off by switching off circuit breaker and test to confirm.legrand HT2302B Flat Panel TV Connection Kit -
CABLES

  3. ATTACH
    After drywall is installed. legrand HT2302B Flat Panel TV Connection Kit -
ATTACH

  4. SECURElegrand HT2302B Flat Panel TV Connection Kit - SECURE

RETROFIT Installation

  1. LOCATElegrand HT2302B Flat Panel TV Connection Kit - LOCATE
  2. TRACE
  3. CUT
  4. ATTACHlegrand HT2302B Flat Panel TV Connection Kit - ATTACH 2
  5. ROUTE THE CABLESlegrand HT2302B Flat Panel TV Connection Kit - ROUTE CABLES
  6. SECURE
    Secure the lock tabs by turning the scews.legrand HT2302B Flat Panel TV
Connection Kit - SECURE 2

WIRING

legrand HT2302B Flat Panel TV Connection Kit -
WIRINGlegrand HT2302B Flat Panel TV Connection
Kit - WIRING 2CONNECT CABLES

Once all electrical connections are complete and the box is installed, turn on the breaker and finish connecting the wires.

legrand HT2302B Flat Panel TV Connection Kit - CABLES
2

ON-Q
IN-WALL TV CONNECTION KIT
NEW CONSTRUCTION / RETROFIT 

legrand HT2302B Flat Panel TV Connection Kit - CONNECTION
KIT

In-wall power products from On-Q provide the perfect solution for a clean and professional installation of your wall-mounted TV. The tamper-resistant receptacle can power multiple devices, such as a TV, sound bar, or streaming players. With concentric knockout rings to support flexible conduit connections on the low voltage side, you can easily hide AV cables inside the wall for a seamless look. The recessed TV box can mount directly to studs with included screws for new construction installation or use drywall clips for retrofit applications, making it the perfect choice for your next home entertainment project.
In-Wall TV Connection Kit Features

  • Professional Look: Hide power and cables for a clean look.
  • Supports LV Cables: Includes concentric knockout rings for support of low voltage cables.
  • New Construction Ready: Mount directly to wall studs with included screws for new construction installation.
  • Retrofit Ready: TV box includes pre-installed wing clamps to secure to drywall in retrofit installations with a separate trim ring for a professional look.

|
---|---
BEFORE| AFTER

legrand HT2302B Flat Panel TV Connection Kit - CONNECTION KIT
2

Model HT2302B-WH HT2302C-WH HT2302K-WH
SKU In-Wall TV Connection Kit (Blank) In-Wall TV Connection Kit (Canada
Compliant) In-Wall TV Connection Kit (With Pre-Wired Outlet)
Info Includes top box with removable trim ring, 1 Gang Old-Work Junction Box,
and necessary mounting hardware. Includes top box with removable trim ring, 1

Gang Old-Work Junction Box with metal grounding clip and necessary mounting hardware.| Includes top box with removable trim ring, 1 Gang Old-Work Junction Box, tamper resistant outlet, cable access brush strap, wall plates and necessary mounting hardware.
Receptacle| N/A| N/A| 15A Decorator TR Receptacle
Color| White| White| White
Agency Listed| UL listed| cUL
(Junction box approved for Canada)| UL listed
| legrand HT2302B Flat Panel TV Connection Kit -
RETROFIT
---|---

NEW CONSTRUCTION

| RETROFIT

Legrand AV Inc.
www.legrand.us
800.321.2343
1.877.BY.LEGRAND
©2023 Legrand AV Inc.
All Rights Reserved.
www.legrand.us/onq
Doc. #1507347 05/23 Rev C

Documents / Resources

| legrand HT2302B Flat Panel TV Connection Kit [pdf] Installation Guide
HT2302B Flat Panel TV Connection Kit, HT2302B, Flat Panel TV Connection Kit, Panel TV Connection Kit, TV Connection Kit, Connection Kit, Kit
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals