ESORUN MAGQOO-AS Magnetic Wireless Charger User Manual
- June 8, 2024
- ESORUN
Table of Contents
ESORUN MAGQOO-AS Magnetic Wireless Charger
Magnetic Wireless Charger User Manual
Note: For best performance and safety, please read this manual carefully before using the product.
Product Diagram
Note :
- Standby Mode: Light is red
- Charging Mode: Light is blue
- FOD Mode: Red and blue lights blink alternately
User Instruction
Connect with wall charger
When using this product, please plug the type-C connector into the charger so
as to ensure it is in standby mode.
Note: In order to get the best charging effect, please use the adapter
that meets the QC2.0, QC3.0 or QC4.0 standard. In order to save energy and
extend the product life, please cut off the power when your phone fully
charged to avoid wasting energy.
Attention For safety reasons, please do not use any adaptor which 1s
under 5V/1A
Charging your iPhone
Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be 15W.
Note:
Under normal charging cond1t1ons, the charger and mobile phone could be
slightly hot; the temperature may rise 1f the mobile phone 1 * charg1 ng {such
as playing video)
Please stop charging your phone when the charger 1s over-heating. Our product
will automat1cally stop charging when over-heating Please try 1t aga1n when
1t’ s cooling down
Remark:
- When the surface gets dirty, please wipe it with a damp cloth and dry it before using.
- Please remove foreign objects on the surface before using, such as coins, pins, keys and other metal objects.
Specifications
- Input : 5V/2A;9V/2.22A
- Wireless Output : 5W;7.5W;10W;15W
- Charging Efficiency : 80%
- Cable Length : 1 Meter
- Product Size : ¢ 55.9mm,THK5.28mm
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>