Laserliner Flexi-Messlatte DERR Laser and Measurement Device User Guide
- June 8, 2024
- Laserliner
Table of Contents
Flexi-Messlatte
User Guide
Flexi-Messlatte DERR Laser and Measurement Device
Principles of taking a measurement using the flexi levelling staff:
In the first step the laser measuring device is aligned and the laser receiver
(A) is mounted onto the levelling staff and set to “0”. Next, the knurled
screw (B) is used to set the flexi levelling staff exactly to laser beam
height “0” (Picture 1).
The laser receiver is then re-adjusted and moved to the height of the laser
beam (Picture 2).
If the measurement point lies below the starting level, the levelling staff
will indicate a negative value; if it lies above, the value indicated will be
positive. So, the plus/minus scale indicates the correct height reference
value straightaway, without the user having to carry out any calculations.
C Plus/minus mm scale
D Height difference
E Millimetre scale for measuring heights
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
**** Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>