Q-TRAN OPTI Aluminum Extrusion Owner’s Manual

June 8, 2024
Q-TRAN

Aluminum Extrusion
Owner’s ManualQ-TRAN OPTI Aluminum Extrusion

OPTI Aluminum Extrusion

FinishQ-TRAN OPTI Aluminum Extrusion - fig 1

Mounting Type – SurfaceQ-TRAN OPTI Aluminum
Extrusion

Mounting – Hardware

Concealed Clip (CC-01) Magnet Clip (MG-02) Magnet Mount Accessory (MMA-02)

2 clips provided for 4′ or less;
4 clips provided for greater than 4′| 1 magnet clip per foot| Sold separately
• Stainless Steel
• Indoor/Outdoor| • Stainless Steel
• Neodymium magnet
• Indoor| • Steel Mounting Strip
• Indoor
• #6 x 5/8″ Flat Head SS (2 per magnet mount accessory included)

Beam Angle

Q-TRAN OPTI Aluminum Extrusion - fig 5

Connectors/Wire

|
---|---
BARE WIRE 24″| CONNECTOR 6″ CONNECTOR 24″
SW, SW-HE, SC wire shown| SW, SW-HE, DW, DW-HE, SC shown

TYPE To order a bare extrusion without a strip installed in Q-Tran factory, choose NI (Not Installed) for your Type optionQ-TRAN OPTI Aluminum
Extrusion - fig 8

TYPE – Asymmetric

Q-TRAN OPTI Aluminum Extrusion - fig 9

© 2022 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
www.q-tran.com
Specification subject to change. Rev-01-20-22

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals