UBIQUITI POE-24-12W PoE Injector User Guide
- June 8, 2024
- UBIQUITI
Table of Contents
UBIQUITI POE-24-12W PoE Injector User Guide
Safety Notices (if appliable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
WARNING: Failure to provide proper ventilation
may cause re hazard. Keep at least 20mm of clearance next to the ventilation
holes for adequate arrows.
WARNING: To reduce the risk of re or electric
shock, do not expose this product to rain or moisture.
WARNING: Do not use this product in a location
that can be submerged by water.
WARNING: Avoid using this product during an
electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information (if appliable)
- Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a re hazard if the limitations are not followed.
- There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
d. Protective earthing is provided by a Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, POE-24-12W, is in compliance with
the essential requirements and other relevant provisions of Directives
2014/30/EU, 2014/35/EU. The full text of the EU declaration of conformity and
detailed compliance information is available at the following internet
address: ui.com/compliance
Ubiquiti International Holding B.V.
Ekkersrijt 3102, Son, Netherlands
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>