IMMERGAS 3.026374 Compact Condensate Drain Pump Kit Instructions
- June 8, 2024
- IMMERGAS
Table of Contents
- IMMERGAS 3.026374 Compact Condensate Drain Pump Kit Instructions
- INSTALLATION.
- WALL-HUNG BOILERS COMPACT CONDENSATE DRAIN PUMP KIT.
- FLOOR STANDING BOILERS COMPACT CONDENSATE DRAIN PUMP KIT
- Floor standing boilers with access door on the right side
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IMMERGAS 3.026374 Compact Condensate Drain Pump Kit Instructions
INSTALLATION.
- Install the pump according to your needs complying with the minimum distance from the boiler as indicated in the pictures on the following page.
- For installation and use instructions refer to the relevant instruction sheets supplied with the pump.
- In installations with condensate drain close to the ground it is recommended to install the 45° rubber adapter (Ref. 1 Fig 2) supplied with the boiler to prevent siphons on the condensate drain pipe.
- Connect the pump’s supply cable to terminals “A” and “B” in the boiler. Or alternatively connect the pump to the electrical line independently.
- Connect the fault signalling cables in series to the boiler’s supply so that boiler supply is interrupted in the event of pump malfunction.
- For series “TT” and Victrix Superior (2022) boilers it is possible to connect the fault signalling cables in series to the overtemperature Klixon thermostat terminals (terminals 14 and 15), in this case should the pump be triggered and block boiler operation, this fault will be shown on its display.
WALL-HUNG BOILERS COMPACT CONDENSATE DRAIN PUMP KIT.
FLOOR STANDING BOILERS COMPACT CONDENSATE DRAIN PUMP KIT
Floor standing boilers with access door on the right side
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>